Toyota 2015 Sienna Manual page 169

Driving position memory
Your preferred driving position (the position of the driver's seat and
outside rear view mirrors) can be recalled by pressing a button.
Two different driving positions can be recorded into memory.
■
Recording procedure
Check that the shift lever is in P.
1
Turn the engine switch to IGNITION ON mode.
2
Adjust the driver's seat and outside rear view mirrors to the
3
desired positions.
While pressing the "SET"
4
button, or within 3 seconds
after the "SET" button is
pressed, press button "1" or
"2" until the signal beeps.
If the
already been preset, the previ-
ously recorded position will be
overwritten.
■
Recall procedure
Check that the shift lever is in P.
1
Turn the engine switch to IGNITION ON mode.
2
Press one of the buttons for
3
the driving position you want
to recall until the signal
beeps.
SIENNA_OM_01999-08001_(U)
selected button has
3-3. Adjusting the seats
169
3