344
5-6. Using an external device
■
About iPod
"Made for iPod" and "Made for iPhone" mean that an electronic accessory
●
has been designed to connect specifically to iPod or iPhone, respectively,
and has been certified by the developer to meet Apple performance stan-
dards.
Apple is not responsible for the operation of this device or its compliance
●
with safety and regulatory standards. Please note that the use of this acces-
sory with iPod or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of
●
Apple Inc., registered in the U.S. and other countries. Lightning is a trade-
mark of Apple Inc.
■
iPod cover art
Depending on the iPod and songs in the iPod, iPod cover art may be dis-
●
played.
This function can be changed to on/off. (P. 328)
●
It may take time to display iPod cover art, and the iPod may not be operated
●
while the cover art display is in process.
Only iPod cover art that is saved in JPEG format can be displayed.
●
■
iPod functions
When an iPod is connected and the audio source is changed to iPod mode,
●
the iPod will resume play from the same point in which it was last used.
Depending on the iPod that is connected to the system, certain functions
●
may not be available. If a function is unavailable due to a malfunction (as
opposed to a system specification), disconnecting the device and recon-
necting it may resolve the problem.
While connected to the system, the iPod cannot be operated with its own
●
controls. It is necessary to use the controls of the vehicle's audio system
instead.
When the battery level of an iPod is very low, the iPod may not operate. If
●
so, charge the iPod before use.
Compatible models (P. 346)
●
SIENNA_OM_01999-08001_(U)