Table of Contents
Advertisement
446
6-4. Using the other interior features
■
Programming a Rolling Code system (for U.S.A. owners)
If your device is Rolling Code equipped, follow the steps under the
heading "Programming the HomeLink
steps listed below.
Locate the training button on the ceiling mounted garage door
1
opener motor. The exact location and color of the button may
vary by brand of garage door opener.
Refer to the operation manual supplied with the garage door opener for
the location of the training button.
Press the training button.
2
Following this step, you have 30 seconds in which to initiate step 3
below.
Press and hold the vehicle's programmed HomeLink
3
2 seconds and release it. Repeat this step once again. The
garage door may open.
If the garage door opens, the programming process is complete. If the
door does not open, press and release the button a third time. This third
press and release will complete the programming process by opening
the garage door.
The ceiling mounted garage door opener motor should now recognize
the HomeLink
Repeat the steps above to program another rolling code system
4
for any of the remaining HomeLink
■
Programming an entry gate (for U.S.A. owners)/Programming
all devices in the Canadian market
Place your transmitter 1 to 3 in. (25 to 75 mm) away from the sur-
1
face of the HomeLink
Keep the indicator light on the HomeLink
Press and hold the selected HomeLink
2
Repeatedly press and release (cycle) the device's remote control
3
button for two seconds each until step 4 is complete.
When the indicator light on the HomeLink
4
ceiver starts to flashing rapidly, release the buttons.
Test the operation of the HomeLink
5
grammed button. Check to see if the gate/device operates cor-
rectly.
Repeat the steps above to program another device for each of
6
the remaining HomeLink
SIENNA_OM_01999-08001_(U)
®
transceiver and operate the garage door.
®
.
®
buttons.
®
" before proceeding with the
®
®
buttons.
®
in view while programming.
®
button.
®
compatible trans-
®
by pressing the newly pro-
button for
Advertisement
Table of Contents
Troubleshooting
