Toyota 2015 Sienna Manual page 116

116
3-2. Opening, closing and locking the doors
Shift the shift lever to P or N,
2
and press and hold the door
lock switch (
approximately 5 seconds and
then release.
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown in the following table.
Use the same procedure to cancel the function.
Shift position linked door locking
function
Shift position linked door unlock-
ing function
Speed linked door locking function
Driver's door linked door unlocking
function
When the setting or canceling operation is complete, all the doors are
locked and then unlocked.
SIENNA_OM_01999-08001_(U)
or
) for
to the
Function
Shift lever Door lock switch
position position
P
N