■
The power back door can be operated when (vehicles with power back
door)
The shift lever is in P.
●
The back door is unlocked.
●
■
Power back door operation (vehicles with power back door)
A buzzer sounds and the emergency flashers flash twice to indicate that the
●
back door is opening/closing.
The back door can be opened and closed manually even when the power
●
back door main switch is off.
■
Jam protection function (vehicles with power back door)
If anything obstructs the power back door while it is closing or opening, the
●
back door will automatically operate in the opposite direction.
If the jam protection function operates during two consecutive closing oper-
●
ations, the back door will be stopped at that position.
■
Back door closer (if equipped)
In the event that the back door is left slightly open, the back door closer will
automatically close it to the fully closed position.
■
When the battery is disconnected
The back door will be automatically locked after the battery is reconnected.
●
The power back door (if equipped) must be initialized in order to ensure
●
proper operation.
Unlock the back door with the wireless remote control or door lock switch.
1
Close the back door completely by hand.
2
■
Conditions affecting the operation of the smart key system or wireless
remote control
P. 118
SIENNA_OM_01999-08001_(U)
3-2. Opening, closing and locking the doors
137
3