Toyota 2015 Sienna Manual page 445

Press and hold one of the
2
HomeLink
transmitter button. When the
HomeLink
changes from a slow to a
rapid flash, you can release
both buttons.
If the HomeLink
comes on but does not flash, or
flashes rapidly for 2 seconds
and remains lit, the HomeLink
button is already programmed.
Use the other buttons or follow
the
HomeLink
(P. 447)
Test the operation of the
3
HomeLink
newly programmed button.
If programming a garage door
opener, check to see if the
garage door opens and closes.
If the garage door does not
operate, see if your garage
transmitter is of the Rolling
Code type. Press and hold the
programmed HomeLink
The garage door has the rolling
code feature if the indicator light
(on the HomeLink
idly for 2 seconds and then
remains lit. If your transmitter is
the Rolling Code type, proceed
to the heading "Programming a
rolling code system".
Repeat the steps above to program another device for each of
4
the remaining HomeLink
SIENNA_OM_01999-08001_(U)
6-4. Using the other interior features
buttons and the
®
® indicator light
®
indicator light
®
"Reprogramming a
®
button" instructions.
®
by pressing the
®
button.
®
) flashes rap-
®
buttons.
445
6