KONICA MINOLTA. The information contained in this guide is intended for use with the KONICA MINOLTA bizhub C35 printers only.
Page 3
Notice KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. reserves the right to make changes to this guide and to the equipment described herein without notice. Consid- erable effort has been made to ensure that this manual is free of inaccuracies and omissions.
SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technolo- gies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form (“Font Programs”), other software which runs on a computer system for use in conjunction with the...
11. Notice to Government End Users: The Software is a “commercial item,” as that term is defined at 48 C.F.R.2.101, consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212. Consis- tent with 48 C.F.R.
Page 6
4. DISCLAIMER OF WARRANTY Adobe licenses the Software to you on an “AS IS” basis. Adobe makes no representation as to the adequacy of the Software for any particular pur- pose or to produce any particular result. Adobe shall not be liable for loss or damage aris- ing out of this Agreement or from the distribution or use of the Software or any other materials.
Page 7
9. GOVERNING LAW This Agreement will be governed by and construed in accordance with the substantive laws in force in the State of California as such laws are applied to agree- ments entered into and to be performed entirely within California between California resi- dents.
Page 9
4. License Method and Restrictions a. You may install and use the Profile on a single desktop computer; provided, however, that, notwithstanding anything contrary contained herein, you may not use the Profile on any network system or share, install or use the Profile concurrently on different computers, or electronically transfer the Profile from one computer to another or over a network.
7. General a. This License Agreement shall be governed and construed in accordance with the laws of Japan, without giving effect to principles of conflict of laws. If any provision of this License Agreement shall be held by a court of competent jurisdiction to be contrary to law, that pro- vision will be enforced to the maximum extent permissible, and the remaining provisions of this License Agreement will remain in full force and effect.
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR- POSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CON- TRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PRO- CUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 12
If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
NetSNMP License Part 1: CMU/UCD copyright notice: (BSD like) Copyright 1989, 1991, 1992 by Carnegie Mellon University Derivative Work - 1996, 1998-2000 Copyright 1996, 1998-2000 The Regents of the University of California All Rights Reserved Permission to use, copy, modify and distribute this software and its documentation for any pur- pose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting doc- umentation, and that the name of CMU and The Regents of the University of California not be...
Page 14
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of condi- tions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 16
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICU- LAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEM- PLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCURE- MENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 17
WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of FundsXpress.
Page 18
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of condi- tions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Contents 1 Operation on Mac OS X ................. 1-1 System Requirements for the Printer Driver ..........1-2 Installing the Printer Driver ................1-3 Installing the Printer Driver................1-3 Uninstalling the printer driver ..............1-8 For Mac OS X 10.2 ..................1-8 For Mac OS X 10.3/10.4 ................
Page 21
Rendezvous Setting................1-30 IP Printing Setting ................1-31 Printer Setup Utility Settings (Mac OS X 10.4) .......... 1-35 When Using a USB Connection ..............1-35 When Using a Network Connection ............1-37 Bonjour Setting ................... 1-37 AppleTalk Setting................1-39 IP Printing Setting ................1-42 Printer Settings (Mac OS X 10.5/10.6) ............
Page 22
[Cover Page] ..................... 1-92 [Scheduler] ....................1-93 [Color Options] ..................1-94 [Advanced Color Options]/[Image] ............1-95 [Advanced Color Options]/[Text] ............... 1-96 [Advanced Color Options]/[Graphics]............1-98 [Advanced Color Options]/[Simulation] ............. 1-99 [Printer Features] ..................1-100 [Supply Levels]..................1-101 [Summary]....................1-102 Specifying the Color Profile ..............1-103 Preparation....................
Page 23
For Print Server Mode With NetWare 4.x Bindery Emulation ..... 3-4 For NetWare 4.x Remote Printer Mode (NDS)..........3-5 For NetWare 4.x/5.x/6 Print Server Mode (NDS) ........3-7 For NetWare 5.x/6 Novell Distributed Print Service (NDPS)....... 3-8 Setting Up a Client (Windows) Settings When Using the NetWare Server......................
Page 24
Authentication method ................6-32 [External Server List]................. 6-34 [Default Function Permission] ..............6-35 LDAP over SSL ..................6-36 [External Server List]................6-36 LDAP settings ..................6-36 [Validate Certificate]................6-38 7 Network Printing .................... 7-1 Network Connection ..................7-2 Theory ......................7-2 Making the Connection ................
Page 25
Adding a printer from the Network window ......... 7-24 Adding a printer using Add Printer Wizard.......... 7-28 Updating the driver after connecting this machine......7-33 If the bit number differs between the server operating system and client operating system..................7-35 Installing the Additional Driver ............
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the fol- lowing system requirements. Computer Apple Macintosh computer installed with the following processor: - PowerPC G3 or later processor (PowerPC G4 or later is recommended) - Intel processor Connecting the computer USB connection (USB 2.0 (High Speed)),...
Installing the Printer Driver You must have administrator privileges in order to install the printer driver. Before proceeding with the installation, be sure to exit all running applications. Installing the Printer Driver The procedure for installing the printer driver on Mac OS X 10.5 is described below.
Page 31
Click [Continue]. Click [Continue]. Installing the Printer Driver...
Page 32
Click [Continue]. Click [Agree] in the confirmation dialog box if you agree to the terms of the license. Installing the Printer Driver...
Page 33
Click [Install] in the [Standard Install] page. Enter the administrator user name and password in the Authenticate dia- log box, and then click [OK]. Installation starts. Installing the Printer Driver...
Page 34
After the installation has been completed, click [Close]. This completes the installation of the printer driver. Installing the Printer Driver...
[KONICA MINOLTA bizhub C35.gz] Delete the unnecessary files from [Library] - [Printers]. – Drag the [KONICA MINOLTA bizhub C35 Color.plugin] file, which is located in [Library] - [Printers] - [PPD Plugins], to the [Trash] icon. – Drag the [pstobzC35PS] file, which is located in [Library] - [Printers] - [KONICAMINOLTA] - [filter], to the [Trash] icon.
The following procedure is not necessary; it is only for users who would like to delete unnecessary files. Drag the [KONICA MINOLTA bizhub C35.gz] file, which is located in [Library] - [Printers] - [PPDs] - [Contents] - [Resources] on the hard disk, to the [Trash] icon.
Restart the computer. This completes uninstallation of the printer driver. Print Center Settings (Mac OS X 10.2.8) When Using a USB Connection Use a USB cable to connect the printer to your computer. Check that the printer is turned on, and then restart the computer. Open [Print Center], which can be accessed by clicking Startup Disk, then [Applications], then [Utilities].
Page 38
Select [bizhub C35] in the [Product] list. If [bizhub C35] does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Select [KONICA MINOLTA] from the [Printer Model] pop-up menu.
The new printer appears in the [Printer List] screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-60. When Using a Network Connection The network connection settings can be specified in one of five ways: AppleTalk setting, Rendezvous setting, IP printing setting, IPP setting and Specifying Port 9100.
Page 40
Select [AppleTalk] from the pop-up menu. Select [BHC35-xxxxxx]. "XXXXXX" refers to the last six digits of the MAC address (in hexadec- imal). Select [KONICA MINOLTA] from the [Printer Model] pop-up menu. Print Center Settings (Mac OS X 10.2.8) 1-13...
Select [KONICA MINOLTA bizhub C35 PPD] in the [Model Name] list. Click [Add]. The new printer appears in the [Printer List] screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-60. Rendezvous Setting Connect the printer to an Ethernet network.
Page 42
Select [Rendezvous] from the pop-up menu. Select [KONICA MINOLTA bizhub C35(xx:xx:xx)]. "xx:xx:xx" refers to the last six digits of the MAC address (in hexadeci- mal). Select [KONICA MINOLTA] from the [Printer Model] pop-up menu. Print Center Settings (Mac OS X 10.2.8) 1-15...
Page 43
Select [KONICA MINOLTA bizhub C35 PPD] in the [Model Name] list. Click [Add]. The new printer appears in the [Printer List] screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-60. 1-16...
IP Printing Setting Connect the printer to an Ethernet network. Open [Print Center], which can be accessed by clicking Startup Disk, then [Applications], then [Utilities]. Click [Add] in the [Printer List]. Select [IP Printing] from the pop-up menu. Print Center Settings (Mac OS X 10.2.8) 1-17...
Page 45
Enter the IP address for the printer in the [Printer's Address] text box. Select [KONICA MINOLTA] from the [Printer Model] pop-up menu. Select [KONICA MINOLTA bizhub C35 PPD] in the [Model Name] list. Click [Add]. 1-18 Print Center Settings (Mac OS X 10.2.8)
Page 46
The new printer appears in the [Printer List] screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-60. Print Center Settings (Mac OS X 10.2.8) 1-19...
IPP Setting Connect the printer to an Ethernet network. Open [Print Center], which can be accessed by clicking Startup Disk, then [Applications], then [Utilities]. In the [Printer List], click [Add] while pressing the Option key in the key- board. Select [Advanced] from the pop-up menu. 1-20 Print Center Settings (Mac OS X 10.2.8)
Page 48
Select [Internet Printing Protocol (http)] from the [Device] pop-up menu. Enter the name for the printer in the [Device Name] text box. In the [Device URI] text box, enter "http://<IP address>/ipp". Select [KONICA MINOLTA] from the [Printer Model] pop-up menu. Print Center Settings (Mac OS X 10.2.8) 1-21...
Page 49
Select [KONICA MINOLTA bizhub C35 PPD] in the [Name] list. Click [Add]. The new printer appears in the [Printer List] screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-60. 1-22 Print Center Settings (Mac OS X 10.2.8)
Specifying Port 9100 Connect the printer to an Ethernet network. Open [Print Center], which can be accessed by clicking Startup Disk, then [Applications], then [Utilities]. In the [Printer List], click [Add] while pressing the Option key in the key- board. Select [Advanced] from the pop-up menu.
Page 51
Select [AppSocket/HP JetDirect] from the [Device] pop-up menu. Enter the name for the printer in the [Device Name] text box. In the [Device URI] text box, enter "socket://<IP address>". Select [KONICA MINOLTA] from the [Printer Model] pop-up menu. 1-24 Print Center Settings (Mac OS X 10.2.8)
Page 52
Select [KONICA MINOLTA bizhub C35 PPD] in the [Name] list. Click [Add]. The new printer appears in the [Printer List] screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-60. Print Center Settings (Mac OS X 10.2.8)
Printer Setup Utility Settings (Mac OS X 10.3) When Using a USB Connection Use a USB cable to connect the printer to your computer. Check that the printer is turned on, and then restart the computer. Open [Printer Setup Utility], which can be accessed by clicking Startup Disk, then [Applications], then [Utilities].
Page 54
Select [bizhub C35] in the [Product] list. If [bizhub C35] does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Check that [KONICA MINOLTA bizhub C35 PPD] is selected in the [Printer Model] list.
When Using a Network Connection The network connection settings can be specified in one of three ways: AppleTalk Setting, Rendezvous Setting and IP printing Setting (IPP, LPD or Socket). AppleTalk Setting Connect the printer to an Ethernet network. Open [Printer Setup Utility], which can be accessed by clicking Startup Disk, then [Applications], then [Utilities].
Page 56
"XXXXXX" refers to the last six digits of the MAC address (in hexadec- imal). Select [KONICA MINOLTA] from the [Printer Model] pop-up menu. Select [KONICA MINOLTA bizhub C35 PPD] in the [Model Name] list. Click [Add]. The new printer appears in the [Printer List] screen.
Disk, then [Applications], then [Utilities]. Click [Add] in the [Printer List]. Select [Rendezvous] from the pop-up menu. Select [KONICA MINOLTA bizhub C35(xx:xx:xx)] in the [Name] list. "xx:xx:xx" refers to the last six digits of the MAC address (in hexadeci- mal).
Select [KONICA MINOLTA] from the [Printer Model] pop-up menu. Select [KONICA MINOLTA bizhub C35 PPD] in the [Model Name] list. Click [Add]. The new printer appears in the [Printer List] screen. If any options are installed, select them. For details, refer to “Selecting Print Options”...
Page 59
Click [Add] in the [Printer List]. Select [IP Printing] from the pop-up menu. Select desired print protocol from the [Printer Type] pop-up menu. - For an LPD setup, select [LPD/LPR]. - For an IPP setup, select [Internet Printing Protocol]. - For a port 9100 setup, select [Socket/HP Jet Direct]. 1-32 Printer Setup Utility Settings (Mac OS X 10.3)
Page 60
Enter the IP address for the machine in the [Printer Address] text box. Select [KONICA MINOLTA] from the [Printer Model] pop-up menu. Select [KONICA MINOLTA bizhub C35 PPD] in the [Model Name] list. Click [Add]. Printer Setup Utility Settings (Mac OS X 10.3)
Page 61
The new printer appears in the [Printer List] screen. If any options are installed, select them. For details, refer to “Selecting Print Options” on page 1-60. 1-34 Printer Setup Utility Settings (Mac OS X 10.3)
Printer Setup Utility Settings (Mac OS X 10.4) When Using a USB Connection Use a USB cable to connect the machine to your computer. Open [Printer Setup Utility], which can be accessed by clicking Startup Disk, then [Applications], then [Utilities]. In the [Printer List], click [Add].
Page 63
Select [bizhub C35] in the [Printer Name]. If [bizhub C35] does not appear, check that the machine is turned on and the USB cable is connected, and then restart the computer. Check that [KONICA MINOLTA bizhub C35 PPD] is selected in the [Print Using] list.
When Using a Network Connection The network connection settings can be specified in one of three ways: Bonjour Setting, AppleTalk setting and IP printing Setting (IPP, LPD or Socket). Bonjour Setting Connect the machine to an Ethernet network. Open [Printer Setup Utility], which can be accessed by clicking Startup Disk, then [Applications], then [Utilities].
Page 65
Select [KONICA MINOLTA bizhub C35(xx:xx:xx)] in the [Printer Browser]. “xx:xx:xx” refers to the last six digits of the MAC address (in hexa- decimal). Check that [KONICA MINOLTA bizhub C35 PPD] is selected in the [Print Using] list. Click [Add]. 1-38...
Select the appropriate settings in the [Hard Disk], [Paper Source Unit] according to your printer setup. Click [Continue]. The new printer appears in the [Printer List] screen. AppleTalk Setting Connect the printer to an Ethernet network. Open [Printer Setup Utility], which can be accessed by clicking Startup Disk, then [Applications], then [Utilities].
Page 67
In the [Printer List], click [Add]. The detected printer appears in the [Printer Browser]. Select [BHC35-xxxxxx] in the [Printer Browser]. 1-40 Printer Setup Utility Settings (Mac OS X 10.4)
Page 68
"XXXXXX" refers to the last six digits of the MAC address (in hexadec- imal). Check that [KONICA MINOLTA bizhub C35 PPD] is selected in the [Print Using] list. Click [Add]. The new printer appears in the [Printer List] screen. Printer Setup Utility Settings (Mac OS X 10.4)
IP Printing Setting Connect the machine to an Ethernet network. Open [Printer Setup Utility], which can be accessed by clicking Startup Disk, then [Applications], then [Utilities]. Click [Add] in the [Printer List]. Click [IP Printer]. 1-42 Printer Setup Utility Settings (Mac OS X 10.4)
Page 70
Select desired print protocol from the [Protocol] pop-up menu. - For an IPP setup, select [Internet Printing Protocol - IPP]. - For an LPD setup, select [Line Printer Daemon - LPD]. - For a port 9100 setup, select [HP Jet Direct - Socket]. Printer Setup Utility Settings (Mac OS X 10.4) 1-43...
Page 71
Enter the IP address for the machine in the [Address] text box. - For an IPP setup, "ipp" in the [Queue] text box. Check that [KONICA MINOLTA bizhub C35 PPD] is selected in the [Print Using] list. Click [Add]. 1-44...
Page 72
Select the appropriate settings in the [Hard Disk], [Paper Source Unit] according to your printer setup. Click [Continue]. The new printer appears in the [Printer List] screen. Printer Setup Utility Settings (Mac OS X 10.4) 1-45...
Printer Settings (Mac OS X 10.5/10.6) When Using a USB Connection Use a USB cable to connect the printer to your computer. Select [System Preferences] from the Apple menu. Click [Print & Fax]. In the [Print & Fax], click [+] button. 1-46 Printer Settings (Mac OS X 10.5/10.6)
Page 74
The detected printer appears in the Printer Browser. Select [KONICA MINOLTA bizhub C35] in the [Printer Name] list. If [KONICA MINOLTA bizhub C35] does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer.
Page 75
Check that [KONICA MINOLTA bizhub C35 PPD] is selected in the [Print Using] list. Click [Add]. Select the appropriate settings in the [Hard Disk], [Paper Source Unit] according to your printer setup. 1-48 Printer Settings (Mac OS X 10.5/10.6)
Page 76
Click [Continue]. The new printer appears in the [Print & Fax] screen. Printer Settings (Mac OS X 10.5/10.6) 1-49...
When Using a Network Connection The network connection settings can be specified in one of three ways: Bon- jour Setting, AppleTalk setting and IP printing setting (IPP, LPD or Socket). Bonjour Setting Connect the machine to an Ethernet network. Select [System Preferences] from the Apple menu. Click [Print &...
Page 78
The detected printer appears in the Printer Browser. Select [KONICA MINOLTA bizhub C35(xx:xx:xx)] in the [Printer Name] list. “xx:xx:xx” refers to the last six digits of the MAC address (in hexadeci- mal). Printer Settings (Mac OS X 10.5/10.6) 1-51...
Page 79
Check that [KONICA MINOLTA bizhub C35 PPD] is selected in the [Print Using] list. Click [Add]. Select the appropriate settings in the [Hard Disk], [Paper Source Unit] according to your printer setup. Click [Continue]. The new printer appears in the [Print & Fax] screen.
AppleTalk Setting (for Mac OS X 10.5) Connect the machine to an Ethernet network. Select [System Preferences] from the Apple menu. Click [Print & Fax]. In the [Print & Fax], click [+] button. The detected printer appears in the Printer Browser. Printer Settings (Mac OS X 10.5/10.6) 1-53...
Page 81
Select [BHC35-xxxxxx] in the [Printer Name] list. "XXXXXX" refers to the last six digits of the MAC address (in hexadec- imal). Check that [KONICA MINOLTA bizhub C35 PPD] is selected in the [Print Using] list. Click [Add]. 1-54 Printer Settings (Mac OS X 10.5/10.6)
Page 82
Select the appropriate settings in the [Hard Disk] and [Paper Source Unit] according to your printer setup. Click [Continue]. The new printer appears in the [Print & Fax] screen. Printer Settings (Mac OS X 10.5/10.6) 1-55...
IP Printing Setting Connect the machine to an Ethernet network. Select [System Preferences] from the Apple menu. Click [Print & Fax]. In the [Print & Fax], click [+] button. 1-56 Printer Settings (Mac OS X 10.5/10.6)
Page 84
Click [IP]. Select desired print protocol from the [Protocol] pop-up menu. - For an IPP setup, select [Internet Printing Protocol - IPP]. - For an LPD setup, select [Line Printer Daemon - LPD]. - For a port 9100 setup, select [HP Jetdirect - Socket]. Printer Settings (Mac OS X 10.5/10.6) 1-57...
Page 85
Enter the IP address for the machine in the [Address] text box. - For an IPP setup, "ipp" in the [Queue] text box. Check that [KONICA MINOLTA bizhub C35 PPD] is selected in the [Print Using] list. Click [Add]. 1-58...
Page 86
Select the appropriate settings in the [Hard Disk], [Paper Source Unit] according to your printer setup. Click [Continue]. The new printer appears in the [Print & Fax] screen. Printer Settings (Mac OS X 10.5/10.6) 1-59...
Selecting Print Options For Mac OS X 10.2/10.3/10.4 Open [Printer Setup Utility (Print Center)], which can be accessed by clicking Startup disk, then [Applications], then [Utilities]. Select this printer in the [Printer List], and then select [Show Info] from the [Printers] menu.
Page 88
Select the appropriate settings in [Hard Disk] and [Paper Source Unit] according to your printer setup. Click [Apply Changes]. Close the [Printer Info] dialog box. Selecting Print Options 1-61...
For Mac OS X 10.5/10.6 Select [System Preferences] from the Apple menu. Click [Print & Fax]. Select this printer in the [Printers] List, and then click [Options & Sup- plies]. Select [Driver] tab. 1-62 Selecting Print Options...
Page 90
Select the appropriate settings in [Hard Disk] and [Paper Source Unit] according to your printer setup. Click [OK]. Close the [Print & Fax] screen. Selecting Print Options 1-63...
Specifying Page Setup Settings (Mac OS X 10.2/10.3/10.4/10.5/10.6) The following dialog box appears when [Page Setup...] is selected from the [File] menu in the application being used. Select [Page Setup...] from the [File] menu. The [Page Setup] dialog box appears. Select this printer in the [Format for] pop-up menu.
Page Attributes Options The [Page Attributes] section is used to specify the settings for the paper size, scaling, and print orientation. [Paper Size] Select the desired paper size from the Paper Size pop-up menu. [Orientation] Select either a vertical or horizontal page orientation for printouts. [Scale] If you want to enlarge or reduce the size of the printout, enter the scale ratio here.
Specifying Custom Paper Size You can also specify a paper size that is not listed in the [Paper Size] pop-up menu. Select [Manage Custom Sizes] from the pop-up menu, in the [Page Setup] dialog box. The [Custom Page Sizes] dialog box appears. Click this button to create a new custom page size.
Page 94
After you have finished entering the settings, click [OK]. Regardless of which paper is selected, the printer does not print within 0.165" (4.2 mm) of the edge of the paper. Specifying Page Setup Settings (Mac OS X 10.2/10.3/10.4/10.5/10.6) 1-67...
Specifying Print Settings (Mac OS X 10.4) The following dialog box appears when [Print...] is selected from the [File] menu in the application being used. Select [Print...] from the [File] menu. The [Print] dialog box appears. Select this printer in the [Printer] pop-up menu. The Print dialog box is used to specify the following print options.
Section Description [Color Options] This section contains options for color print- ing. [Printer Features] This section contains options for specifying paper type and resolution settings. [Supply Levels] This section provides information for check- ing the amount of service life remaining on each consumable.
[Copies & Pages] The [Copies & Pages] section is used to specify the number of copies to print and the range of pages to print. [Copies] This specifies the number of copies to be printed. If the [Collated] check- box is selected, all pages in the documents are printed as sets of print- outs.
[Layout] The [Layout] section is used to specify the page layout when printing and the setting for double-sided printing. [Pages per Sheet] Specifies the number of pages to be printed on one sheet of paper. For example, if [2] is selected, two pages are printed on one sheet of paper. [Layout Direction] If you are printing more than one page per sheet, this specifies the direc- tion and order the pages should be arranged on each sheet of paper.
[Scheduler] The [Scheduler] section is used to specify the timing and priority for printing jobs. [Print Document] [Now]: Select this option to begin printing immediately. [At]: Specify the time to begin printing. [On Hold]: Select this option to hold the print job. [Priority] Select the priority for printing jobs that are being held.
[Paper Handling] The [Paper Handling] section is used to specify the pages that are to be printed and the order in which the pages are printed. [Page Order] [Automatic]: Select this option to print in the original page order of the document.
[ColorSync] [Color Conversion] Allows you to select host-based color matching or printer-based color matching. [Quartz Filter] Allows you to select Quartz Filter. [Cover Page] [Print Cover Page] Allows you to set cover page before or after document. [Cover Page Type] Allows you to select cover page type.
[Error Handling] [PostScript Errors] Allows you to select whether or not a report is outputted when a Post- Script error occurs. [Tray Switching] This feature is not available with this printer. Specifying Print Settings (Mac OS X 10.4) 1-75...
[Paper Feed] The [Paper Feed] section is used to specify the paper feed setting. [All pages from] All pages in the document are printed using the paper in the specified paper tray. [First page from] The first page of the document is printed on paper from a paper tray differ- ent from the tray used to print the rest of the document.
[Color Options] [Color Settings] Allows you to select a color preset. [Brightness] Allows you to set Brightness. [Color as Grayscale] Allows you to set Grayscale color. [Color Separation] Allows you to set Color Separation. [Toner Save] Allows you to set Toner Save Mode. [Edge Strength] Allows you to select Edge Strength.
If [Text/Figure] is selected, superimposed printing is applied to text and graphics. If [Text] is selected, superimposed printing is applied to text. [Advanced Color Options] Click this button to display th e [Advanced Color Options] p ane. This button enables when [Custom] is selected under [Quick Color]. [Advanced Color Options]/[Image] [RGB Source] Allows you to select RGB color profiles for images.
In order to start up Download Manager from the [Advanced Color Options] pane, Download Manager must be copied into the folder at the path [Applications/Download Manager bizhub C35]. After creating the folder [Download Manager bizhub C35] in the [Applications] folder, copy Download manager into the created folder. [Advanced Color Options]/[Text] [RGB Source] Allows you to select RGB color profiles for text.
Page 107
In order to start up Download Manager from the [Advanced Color Options] pane, Download Manager must be copied into the folder at the path [Applications/Download Manager bizhub C35]. After creating the folder [Download Manager bizhub C35] in the [Applications] folder, copy Download manager into the created folder. 1-80...
[Advanced Color Options]/[Graphics] [RGB Source] Allows you to select RGB color profiles for graphics. [RGB Intent] Allows you to select color intent for RGB graphics. [RGB Gray Treatment] Allows you to select RGB gray treatment for graphics. [Destination Profile] Allows you to select Destination Profile for graphics. [Halftone] Allows you to select halftone for graphics.
In order to start up Download Manager from the [Advanced Color Options] pane, Download Manager must be copied into the folder at the path [Applications/Download Manager bizhub C35]. After creating the folder [Download Manager bizhub C35] in the [Applications] folder, copy Download manager into the created folder. [Advanced Color Options]/[Simulation] [Simulation Profile] Allows you to select color profiles for simulation.
In order to start up Download Manager from the [Advanced Color Options] pane, Download Manager must be copied into the folder at the path [Applications/Download Manager bizhub C35]. After creating the folder [Download Manager bizhub C35] in the [Applications] folder, copy Download manager into the created folder. [Printer Features]...
[Supply Levels] The [Supply Levels] section provides information for checking the amount of service life remaining on each consumable. The [Supply Levels] section appears when a printer is created on Mac OS X 10.4 with a Bonjour, IPP, LPD, Socket connection. The [Supply Levels] section may not appear depending on the appli- cation you use.
Specifying Print Settings (Mac OS X 10.5/10.6) The following dialog box appears when [Print...] is selected from the [File] menu in the application being used. Select [Print...] from the [File] menu. The [Print] dialog box appears. Select this printer in the [Printer] pop-up menu. The Print dialog box is used to specify the following print options.
Section Description [Color Options] This section contains options for color print- ing. [Printer Features] This section contains options for specifying paper type and resolution settings. [Supply Levels] This section provides information for check- ing the amount of service life remaining on each consumable.
[Layout] The [Layout] section is used to specify the page layout when printing and the setting for double-sided printing. [Pages per Sheet] Specifies the number of pages to be printed on one sheet of paper. For example, if [2] is selected, two pages are printed on one sheet of paper. [Layout Direction] If you are printing more than one page per sheet, this specifies the direc- tion and order the pages should be arranged on each sheet of paper.
[Flip horizontally] (OS X 10.6 only) Select whether or not to print the page flipped horizontally. [Color Matching] [Color Matching] [ColorSync]: Allows you to select host-based color matching. [In Printer]: Allows you to select printer-based color matching. [Profile] Allows you to select ColorSync Profile. Specifying Print Settings (Mac OS X 10.5/10.6) 1-89...
[Paper Handling] The [Paper Handling] section is used to specify the pages that are to be printed and the order in which the pages are printed. [Pages To Print] [All pages]: Select this option to print all pages. [Odd Only]: Select this option to print only the pages with odd page num- bers.
[Paper Feed] The [Paper Feed] section is used to specify the paper feed setting. [All pages from] All pages in the document are printed using the paper in the specified paper tray. [First page from] The first page of the document is printed on paper from a paper tray differ- ent from the tray used to print the rest of the document.
[Cover Page] [Print Cover Page] Allows you to set cover page before or after document. [Cover Page Type] Allows you to select cover page type. [Billing Info] Allows you to set billing information printed on cover page. 1-92 Specifying Print Settings (Mac OS X 10.5/10.6)
[Scheduler] The [Scheduler] section is used to specify the timing and priority for printing jobs. [Print Document] [Now]: Select this option to begin printing immediately. [At]: Specify the time to begin printing. [On Hold]: Select this option to hold the print job. [Priority] Select the priority for printing jobs that are being held.
[Color Options] [Color Settings] Allows you to select a color preset. [Brightness] Allows you to set Brightness. [Color as Grayscale] Allows you to set Grayscale color. [Color Separation] Allows you to set Color Separation. [Toner Save] Allows you to set Toner Save mode. [Edge Strength] Allows you to select Edge Strength.
[Black Over Print] Allows you to specify whether black objects are printed (superimposed) on a neighboring color in order to prevent white space around black char- acters or figures. If [Text/Figure] is selected, superimposed printing is applied to text and graphics.
[Edge Enhancement] Allows you to select Edge Enhancement for images. [Hide Advanced Options] Click this button to hide the [Advanced Color Options] pane and display the [Color Options] pane. [Manage Profile] Click this button to display the [Color Profile Management] dialog box. From this dialog box, color profiles can be added or deleted to those avail- able as settings for [RGB Source] and [Simulation Profile] of the [Advanced Color Options] pane.
Page 124
[Edge Enhancement] Allows you to select Edge Enhancement for text. [Hide Advanced Options] Click this button to hide the [Advanced Color Options] pane and display the [Color Options] pane. [Manage Profile] Click this button to display the [Color Profile Management] dialog box. From this dialog box, color profiles can be added or deleted to those avail- able as settings for [RGB Source] and [Simulation Profile] of the [Advanced Color Options] pane.
[Advanced Color Options]/[Graphics] [RGB Source] Allows you to select RGB color profiles for graphics. [RGB Intent] Allows you to select color intent for RGB graphics. [RGB Gray Treatment] Allows you to select RGB gray treatment for graphics. [Destination Profile] Allows you to select Destination Profile for graphics. [Halftone] Allows you to select halftone for graphics.
[Advanced Color Options]/[Simulation] [Simulation Profiles] Allows you to select color profiles for simulation. [Match Paper Color] Allows you to set Match Paper Color. [CMYK Gray Treatment] Allows you to select Simulation gray treatment. [Hide Advanced Options] Click this button to hide the [Advanced Color Options] pane and display the [Color Options] pane.
[Printer Features] [Nearest Size and Scale] If no paper tray contains paper of the specified size, the page is automati- cally enlarged or reduced and paper of the most appropriate size is selected. [Manually Print on 2nd Side] This feature must be set when you set paper already printed on the front side.
[Supply Levels] The [Supply Levels] section provides information for checking the amount of service life remaining on each consumable. The [Supply Levels] section appears when a printer is created on Mac OS X 10.5/10.6 with a Bonjour, IPP, LPD, Socket connection. The [Supply Levels] section may not appear depending on the appli- cation you use.
In order to start up Download Manager from the [Advanced Color Options] pane, Download Manager must be copied into the folder at the path [Applications/Download Manager bizhub C35]. After creating the folder [Download Manager bizhub C35] in the [Applications] folder, copy Download manager into the created folder. Downloading Color Profiles Use Download Manager to download any color profile to the hard disk of the machine.
Page 131
In the Download Manager window, select [Color Profile]. Then, from the [Choose Printer] list, select the printer where the color profile is to be saved. Click [Download], and then select [Disk] beside [Location]. 1-104 Specifying the Color Profile...
Click [Browse], and then select the color profile to be downloaded. File names for color profiles should be in the following format: 8 or less ASCII characters + 3 or less ASCII extension characters. Click [Download Profile]. Downloading of the color profile to the hard disk of the machine. Click [OK].
Page 133
Select [Color Options]. Select [Custom] beside [Color Settings], and then click [Advanced Color Options]. 1-106 Specifying the Color Profile...
Page 134
Click [Manage Profile]. From [Driver Profile List], select the type of profile to use. Specifying the Color Profile 1-107...
Page 135
Select the color profile to use from the list, and then click [Add]. Click [OK]. 1-108 Specifying the Color Profile...
Page 136
Select [Simulation]. Select the added color profile before printing. Specifying the Color Profile 1-109...
System Requirements for the Scanner Driver Before installing the scanner driver, make sure that your system meets the following system requirements. Computer Apple Macintosh computer installed with the following processor: – PowerPC G3 or later processor (Pow- erPC G4 or later is recommended) –...
Insert the Drivers CD/DVD in the CD/DVD-ROM drive of your Macintosh. Double-click the CD icon on the desktop, [Drivers] folder, [Mac] folder, [Scanner] folder, and then double-click the [KONICA MINOLTA bizhub C35 Scanner.pkg]. The installer for the scanner driver starts up.
Page 139
Click [Continue]. Check [Continue]. Click [Agree] in the confirmation dialog box if you agree to the terms of the license. 1-112 Installing the Scanner Driver...
Page 140
Click [Install] in the [Standard Install] page. Enter the administrator user name and password in the Authenticate dia- log box, and then click [OK]. Installation starts. Installing the Scanner Driver 1-113...
Page 141
After the installation has been completed, click [Close]. This completes the installation of the scanner driver. 1-114 Installing the Scanner Driver...
Uninstalling the Scanner Driver Double-click [KONICA MINOLTA bizhub C35 Uninstaller.app], which can be accessed by clicking [Library], then [Application Support], [KONICA MINOLTA], then [bizhub C35]. Click [Uninstallation]. Click [OK]. Enter the administrator user name and password, and then click [OK].
Page 143
Click [OK]. This completes the uninstallation of the scanner driver. 1-116 Uninstalling the Scanner Driver...
Scanning From a Computer Application Documents can be scanned from a computer connected to this machine via a network. Scanning settings can be specified and the scanning operation can be performed from TWAIN-compatible applications. From the scanner driver, a preview can be displayed and various adjustments, such as the size of the scan area can be specified.
Page 145
Select this printer in the [Select IP address from connected devices] list, and then click [OK]. If this printer does not appear in the list, click [Update]. Otherwise, select [Specify IP address], and then enter the IP address of this machine in the [IP address] box.
Troubleshooting Symptom Solution The setting in the saved Depending on the functions selected for the presets are not applied. printer, some preset settings are not saved. Media type error appears. If a media type, such as “Thick paper”, is specified for Tray 3 or Tray 4, a media type error appears and the printer stops.
Page 147
Symptom Solution When printing 2 pages on a Depending on the operating system, the single sheet of paper, the pages are not centered on the paper when pages are not centered on printing two pages on a single sheet of paper the paper.
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the fol- lowing system requirements. Operating systems Red Hat Enterprise Linux 5 Desktop SUSE Linux Enterprise Desktop 10 Connecting the computer USB connection, Network connection and printer (10Base-T/100Base-TX/1000Base-T) More than OS recommendation (128 MB or...
Enter the command “/etc/init.d/cups restart”. Quit Terminal. Adding the Printer Using Printer configuration Before proceeding with the installation, be sure to exit all running applications. Root privileges are required in order to add the printer. Connect the machine to a computer or the network. - With a USB connection, the following dialog box appears.
Page 151
From the [System] menu, select [Administration], then [Printing]. The [Printer configuration] dialog box appears. Click [New Printer]. The [New Printer] dialog box appears. Enter the [Printer name], [Description], and [Location], and then click [For- ward]. Adding the Printer Using Printer configuration...
Page 152
From the left pane of the dialog box, select the port for the machine to be installed. - For a USB connection, select [KONICA MINOLTA bizhub C35 USB #1]. - For a machine connected to the network, select [KONICA MINOLTA bizhub C35] <IP address>.
Page 153
Click the folder icon. The [Select A File] dialog box appears. Select the PPD file. A ppd file for each language is available in the corresponding "Drivers/ LinuxPPD/<language>" folder on the CD/DVD. Use the appropriate ppd file for the language. Click [Open].
Page 154
Click [Forward]. A confirmation message appears. Click [Apply]. The following dialog box appears. Adding the Printer Using Printer configuration...
Adding the Printer on the CUPS Administration Web page Before proceeding with the installation, be sure to exit all running applications. Root privileges are required in order to add the printer. Connect the machine to a computer or the network. - With a USB connection, the following dialog box appears.
Page 156
Using printer Hostname - socket://Hostname:9100 Hostname may be substi- tuted by IP Address, and Port is optional. Click [Continue]. Select [KONICA MINOLTA], click [Continue]. A ppd file for each lan- guage is available in the corresponding "Drivers/ LinuxPPD/<language>" folder on the CD/DVD.
Page 157
Select [KONICA MINOLTA bizhub C35 (en)], then click [Add Printer]. A pop-up window appears. Enter the user name and password for using root privi- leges, and then click [OK]. The following message appears. 2-10 Adding the Printer on the CUPS Administration Web page...
Specifying Printer Driver Settings Displaying the Settings Page Start up the Web browser. Enter the URL “http://local- host:631”, and then click [Manage Printers]. The following window appears. Click [Set Printer Options]. The printer driver settings page appears. Specifying Printer Driver Settings 2-11...
Printer Driver Settings Options Installed Parameters Settings [Paper Source Unit] Select [Unit 3 + Unit 4], [Unit 4] if an optional lower feeder unit for the printer has been installed. The default setting is [Disabled]. [Hard Disk] Select [None], or [Installed] for the storage unit that is installed.
Page 160
Parameters Settings [Paper Sizes] Specifies the paper size. An irregular paper size cannot be selected. [Collate] If [On] is selected, all pages in the documents are printed as sets of printouts. The default setting is [Off.] [Duplex Options] Specifies the duplex print binding position as [Simplex], [Long Edge], or [Short Edge], if the duplex unit for the printer has been installed.
Parameters Settings [Black Over Print] Specify whether black objects are printed (superimposed) on a neighboring color in order to prevent white space around black characters or figures. If [Text/Figure] is selected, superimposed printing is applied to text and graphics. If [Text] is selected, superimposed printing is applied to text.
Text Options Parameters Settings [Text RGB Source] Specifies RGB source for text as [None], [sRGB], [Adobe RGB (1998)], [Apple RGB], [ColorMatch RGB], or [Blue Adjust RGB]. The default setting is [sRGB]. [Text RGB Intent] Specifies RGB intent for text as [Vivid], [Pho- tographic], [Relative Color], or [Absolute Color].
Parameters Settings [Graphics Halftone] Specifies the halftone for graphic as [Line Art], [Detail] or [Smooth]. The default setting is [Detail]. [Graphics Edge Enhance- Select whether graphic edges are empha- ment] sized. The default setting is [On]. Simulation Parameters Settings [Simulation Profile] Specifies the simulation profile as [None], [SWOP], [Euroscale], [Commercial Press], [DIC], [TOYO], or [Japan Color].
Printing a Document The contents and available options that appear in the print dialog box may vary depending on the application being used. Example Using OpenOffice The procedure for printing on Red Hat Enterprise Linux 5 with Ope- nOffice 2.0.4 is described below. The following procedure or some steps may be different depending on the version of the operating sys- tem being used.
Page 165
Select the name of the printer. Click [Print] to print the document. 2-18 Printing a Document...
Checking Print Jobs You can check the status of print jobs from a Web browser. Start up the Web browser. Enter the URL “http://local- host:631”. The CUPS Administration Web page appears. Click [Manage Jobs]. A list of the currently active print jobs appear.
Troubleshooting Symptom Action The printer stops because The job may have been sent with a prohibited of a paper size error or a combination of settings (for example, for the paper type error. paper size and media type). Printing is not possible with postcards or overhead projector transparencies if [Plain Paper] is selected.
Printing With NetWare The printer controller supports the following environments. Network Printing in a NetWare Environment NetWare Version Protocol Used Emulation Service Mode NetWare 4.x Bindery/NDS Pserver/Nprinter NetWare 5.x/6 Pserver/Nprinter TCP/IP NDPS(lpr) For Remote Printer Mode With NetWare 4.x Bindery Emulation Before using bindery emulation, check that bindery emulation is compatible with the NetWare server.
Page 170
In Administrator mode of PageScope Web Connection, select [NetWare Settings] from the [Network] tab, and then specify the following settings. – [IPX/SPX]: Select [Enable]. – [Ethernet Frame Type]: Select [Auto]. (Select the frame type according to the network environment.) – [NetWare Print Mode]: Select [NPrinter/RPrinter].
For Print Server Mode With NetWare 4.x Bindery Emulation Before using bindery emulation, check that bindery emulation is com- patible with the NetWare server. From a client computer, log on with Supervisor permissions to access the NetWare server where the Pserver is registered. Start up Pconsole.
– [Ethernet Frame Type]: Select [Auto]. (Select the frame type according to the network environment.) – [NetWare Print Mode]: Select [PServer]. – [Print Server Name]: Specify the print server name created in step 4. – [Print Server Password]: Specify only when setting from the NetWare server. –...
Page 173
In Administrator mode of PageScope Web Connection, select [NetWare Settings] from the [Network] tab, and then specify the following settings. – [IPX/SPX]: Select [Enable]. – [Ethernet Frame Type]: Select [Auto]. (Select the frame type according to the network environment.) – [NetWare Print Mode]: Select [NPrinter/RPrinter].
For NetWare 4.x/5.x/6 Print Server Mode (NDS) To use the Print Server mode, the IPX protocol must be loaded on the NetWare server. Log on to NetWare as an administrator from a client computer. Start up NWadmin. Select either the organization or organizational unit container that offers the print service, and then click [Print Services Quick Setup (non-NDPS)] on the [Tools] menu.
– [Ethernet Frame Type]: Select [Auto]. (Select the frame type according to the network environment.) – [NetWare Print Mode]: Select [PServer]. – [Print Server Name]: Specify the print server name created in step – [Print Server Password]: Specify only when setting from the NetWare server.
In the [Gateway Types], select [Novell Printer Gateway], and then register In the Configure Novell PDS for Printer Agent window, select [(None)] for the printer type and [Novell Port Handler] for the port handler type, and then register the settings. In [Connection type], select [Remote (LPR on IP)], and then register it.
Installing Printer Utilities on Windows You must have administrator privileges in order to install the Printer Utilities. Before proceeding with the installation, be sure to exit all running applications. The following procedure describes how to install the Printer Utilities. End User Tools PageScope Direct Print Administration Tools PageScope Data Administrator...
Displaying the [Ethernet] screen From the [Ethernet] screen (Admin Settings), specify various network settings for the machine. From the Admin Settings screen, various settings are available to be changed by the machine administrator. In order to display the Admin Settings screen, the user must log on using the administrator password.
[Ethernet] (Admin Settings) If the machine is connected to a network, the following settings should be specified. For details about each setting, contact your network administrator. Item Description [TCP/IP] Specify settings for the machine's network connec- tion (TCP/IP). [Enable] Select whether or not to enable TCP/IP. Default: [Yes] If [No] is selected, the TCP/IP parameters do not appear.
Page 184
Item Description [Telnet] Select whether or not to enable Telnet transmis- sions. Default: [Enable] [Bonjour] Select whether or not to enable Bonjour. Default: [Enable] [Dynamic DNS] Select whether or not to enable Dynamic DNS. Default: [Disable] [IPP] Select whether or not to enable IPP. Default: [Enable] [RAW Port] Specify the RAW port settings.
Page 185
Item Description [IP Address Filter] Specify IP address filtering settings. [Permit Specify access permissions for IP address filter- Access] ing. Default: [Disable] [Deny Access] Specify access blocking for IP address filtering. Default: [Disable] [IPv6] Specify IPv6 settings. [Enable] Select whether or not to enable IPv6. Default: [Yes] [Auto Setting] Select whether or not to enable the IPv6 auto set-...
Page 186
Item Description [S/MIME Comm. Specify S/MIME communication settings. Setting] [S/MIME Enabled] Select whether or not to enable S/MIME. Default: [Disable] [Digital Signature] Select the setting for digital signatures. Select [Always add signature] to add the digital signature and send the E-mail message. Select [Do not add signature] to not add a digital signature when sending E-mail messages.
Limiting users of this machine (device authentication) This machine can be configured with device authentication in order to restrict its use. Specify user authentication and account track settings to limit the use of this machine and control the operations available to each user. Manage individual users by specifying user authentication settings, and manage a group (such as a department) or multiple users by specifying account track settings.
Authentication methods In Administrator mode of PageScope Web Connection, click [Security] tab - [Authentication] - [General Settings]. Item Description Preliminary inquiry [User Authentication] Select [Device]. [Public Access] Select whether to allow Do you wish to per- public user access. mit public user access? If [Allow] is selected, public users must press [Public...
Page 191
Item Description Preliminary inquiry [Synchronize User To synchronize user Do you wish to syn- Authentication & authentication and account chronize user authen- Account Track] track and manage users for tication and account each account, select [Syn- track settings? chronize]. [Number of Counters Type in the number of Assigned for Users] counters to be assigned...
Registering users In Administrator mode of PageScope Web Connection, click [Security] tab - [Authentication] - [User List] - [New Registration]. Item Description Preliminary inquiry [User Name] Type in a user name. (up to 64 characters) [E-mail Address] Type in the e-mail address of the user.
Page 193
Item Description Preliminary inquiry [Account Track Num- Specify the account num- ber] ber for the user being regis- tered. Before an account number can be specified, accounts must have been registered. This item is displayed if user authentication and account track are synchronized.
Page 194
Item Description Preliminary inquiry [Max. Allowance Set] Specify the maximum num- ber of pages that can be printed. To specify a limit, select the appropriate check box, and then type in the desired maximum value. [Authentication Shows whether or not an Device Settings authentication device has been registered.
Registering accounts In Administrator mode of PageScope Web Connection, click [Security] tab - [Account Track List] - [New Registration]. Item Description Preliminary inquiry [Account Name] Type in an account name. (up to 8 characters, exclud- ing spaces and ") [Password] Type in a password.
Page 196
Item Description Preliminary inquiry [Max. Allowance Set] Specify the maximum num- ber of pages that can be printed. To specify a limit, select the appropriate check box, and then type in the desired maximum value. When [Admin Settings] - [Security Settings] - [Security Details] - [Password Rules] is set to [On] in the control panel, a password con- taining less than eight characters cannot be specified.
Limiting users of this machine (Active Directory authentication) This machine can be configured with Active Directory authentication in order to restrict its use. These settings must be specified if you wish to perform user authentication with Active Directory on Windows Server. The operations available to each user can be restricted.
Authentication method In Administrator mode of PageScope Web Connection, click [Security] tab - [Authentication] - [General Settings]. Item Description Preliminary inquiry [User Authentication] Select [External Server]. [Public Access] Select whether to allow Do you wish to permit public user access. public user access? If [Allow] is selected, public users must press [Public...
Page 199
Item Description Preliminary inquiry [Ticket Hold Time Specify the length of time (Active Directory)] that Kerberos authentica- tion tickets are held. [Account Track] To use account track, select Do you wish to use [On]. account track? Before [On] can be selected, specify the authentication method, and then register accounts from...
[External Server List] In Administrator mode of PageScope Web Connection, click [Security] tab - [Authentication] - [External Server List] - [Edit] - [Active Directory]. Item Description Preliminary inquiry [Name] Type in the name of the external authentication server. (up to 32 characters) [Default Domain Type in the default domain Default domain name...
[Default Function Permission] In Administrator mode of PageScope Web Connection, click [Security] tab - [Authentication] - [Default Function Permission]. Item Description Preliminary inquiry [Copy] Specify the default function permissions for users [Scan to Network] authenticated with the [Scan to HDD] external server.
When [Admin Settings] - [Security Settings] - [Security Details] - [Man- ual Destination Input] is set to [Restrict] in the control panel, the user cannot manually enter an address, regardless of the setting selected for this parameter. Date/time settings In order to use Active Directory, specify the date and time of this machine. You cannot log on to Active Directory if the system time of this machine and Active Directory is extremely different.
Limiting users of this machine (Windows domain or workgroup authentication) This machine can be configured with NTLM authentication in order to restrict its use. These settings must be specified if you wish to perform NTLM authentication when using Windows NT 4.0 or when using Active Directory (NT-compatible domain environment) on a Windows Server.
Page 204
Specify settings according to the following flowchart. Clicking a step in the flowchart displays the description of the corresponding procedure. TCP/IP settings Authentication method [External Server List] [Default Func- tion Permission] In an IPv6 envi- ronment? Do you use a [Direct Hosting WINS server? Settings]...
TCP/IP settings Specify settings to use this machine in a TCP/IP network environment. In order to perform NTLM authentication in an IPv6 environment config- ured with Active Directory (NT-compatible domain environment) on Win- dows Server 2008, specify the IPv6 settings. For details on the IPv6 settings, refer to “[IPv6 Settings]”...
Page 206
Item Description Preliminary inquiry [User Authentication] Select [External Server]. [Public Access] Select whether to allow Do you wish to permit public user access. public user access? If [Allow] is selected, public users must press [Public User Access] in the login screen to log on to this machine.
[External Server List] In Administrator mode of PageScope Web Connection, click [Security] tab - [Authentication] - [External Server List] - [Edit] - [NTLM]. Item Description Preliminary inquiry [Name] Type in the name of the external authentication server. (up to 32 characters) [Server Type] Select [NTLM v1] or [NTLM v2].
[Default Function Permission] Specify the default function permissions for users authenticated with the external server. For details, refer to “[Default Function Permission]” on page 6-14. [WINS Settings] In order to start NTLM authentication via the router, WINS server settings must be specified. For details, refer to “[WINS Settings]”...
Limiting users of this machine (NDS over IPX/SPX authentication) This machine can be configured with NDS over IPX/SPX authentication in order to restrict its use. These settings must be specified if you wish to use NetWare 5.1 or later and use NDS authentication in an IPX/SPX environment.
Authentication method In Administrator mode of PageScope Web Connection, click [Security] tab - [Authentication] - [General Settings]. Item Description Preliminary inquiry [User Authentication] Select [External Server]. [Public Access] Select whether to allow Do you wish to permit public user access. public user access? If [Allow] is selected, public users must press [Public...
Item Description Preliminary inquiry [Account Track] To use account track, select Do you wish to use [On]. account track? Before [On] can be selected, specify the authentication method, and then register accounts from the [Account Track List] page. [Synchronize User To synchronize user Do you wish to syn- Authentication &...
Item Description Preliminary inquiry [Name] Type in the name of the external authentication server. (up to 32 characters) [Server Type] Select [NDS over IPX/SPX]. [Default Tree] Type in the default NDS tree name. (up to 63 characters) [Default Context] Type in the default NDS context name.
[NetWare Settings] In Administrator mode of PageScope Web Connection, click [Network] tab - [NetWare Settings] - [NetWare Settings]. Item Description Preliminary inquiry [IPX/SPX] Select [Enable]. [Ethernet Frame Select a frame type to be Frame type Type] used. 6-26 Limiting users of this machine (NDS over IPX/SPX authentication)
Limiting users of this machine (NDS over TCP/IP authentication) This machine can be configured with NDS over TCP/IP authentication in order to restrict its use. These settings must be specified if you wish to use NetWare 5.1 or later and use NDS authentication in a TCP/IP environment.
Authentication method In Administrator mode of PageScope Web Connection, click [Security] tab - [Authentication] - [General Settings]. Item Description Preliminary inquiry [User Authentication] Select [External Server]. [Public Access] Select whether to allow Do you wish to permit public user access. public user access? If [Allow] is selected, public users must press [Public...
Item Description Preliminary inquiry [Account Track] To use account track, select Do you wish to use [On]. account track? Before [On] can be selected, specify the authentication method, and then register accounts from the [Account Track List] page. [Synchronize User To synchronize user Do you wish to syn- Authentication &...
Item Description Preliminary inquiry [Name] Type in the name of the external authentication server. (up to 32 characters) [Server Type] Select [NDS over TCP/IP]. [Default Tree] Type in the default NDS tree name. (up to 63 characters) [Default Context] Type in the default NDS context name.
Limiting users of this machine (LDAP authentication) This machine can be configured with LDAP authentication in order to restrict its use. These settings must be specified if you wish to use the LDAP server for user authentication. The operations available to each user can be restricted. Specify settings according to the following flowchart.
TCP/IP settings Specify settings to use this machine in a TCP/IP network environment. Authentication method In Administrator mode of PageScope Web Connection, click [Security] tab - [Authentication] - [General Settings]. 6-32 Limiting users of this machine (LDAP authentication)
Page 220
Item Description Preliminary inquiry [User Authentication] Select [External Server]. [Public Access] Select whether to allow Do you wish to permit public user access. public user access? If [Allow] is selected, public users must press [Public User Access] in the login screen to log on to this machine.
[External Server List] In Administrator mode of PageScope Web Connection, click [Security] tab - [Authentication] - [External Server List] - [Edit] - [LDAP]. Item Description Preliminary inquiry [Name] Type in the name of the external authentication server. (up to 32 characters) [Server Address] Specify the LDAP server Server address...
Item Description Preliminary inquiry [Port Number] Type in the port number. Default: 389 [Search Base] Specify the starting point for searching directories in the LDAP server. (up to 255 characters) Searches are performed by also including the sub-direc- tories of the specified start- ing point.
LDAP over SSL [External Server List] In Administrator mode of PageScope Web Connection, click [Security] tab - [Authentication] - [External Server List] - [Edit] - [LDAP]. Item Description Preliminary inquiry [SSL] To apply SSL encryption to Does the server sup- communications between port SSL? this machine and the LDAP...
Page 224
Item Description Preliminary inquiry [Chain] Select whether to check that the server certificate chain (certification path) is correct. The chain is validated by referencing the external cer- tificates managed on this machine. For details, refer to “[External Certificate]” on page 8-79. [Check CRL Expira- Select whether to use CRL tion]...
[Validate Certificate] In Administrator mode of PageScope Web Connection, click [Security] tab - [PKI Settings] - [Validate Certificate]. Item Description Preliminary inquiry [Certificate Verifica- To verify the server certifi- tion] cate, select [Enable]. [Timeout] Specify the length of time Do you wish to con- until expiration date confir- firm the expiration mation times out.
Page 226
Item Description Preliminary inquiry [URL] Type in the URL of the OCSP service. (up to 511 characters) If this item is left blank, the machine accesses the URL of the OCSP service embedded in the certifi- cate. If the URL of the OCSP service is not embedded in the certifi- cate, an error will occur.
Page 227
Item Description Preliminary inquiry [No Proxy for follow- To enable expiration date ing domain] confirmation, specify an address that does not use the proxy server depending on your environment. If the DNS server has already been configured, enter the host name instead.
Network Connection Theory To connect your printer in a TCP/IP network environment, you must make sure that the internal network addresses in the printer have been set. In many cases, you have to enter only a unique IP address. However, you may also have to enter a subnet mask and/or a gateway (router) address,...
Making the Connection Ethernet Interface An RJ45 connector can be used as the Ethernet interface for this machine. When connecting your machine to an Ethernet network, the tasks you per- form depend on how you plan to set the machine’s IP (Internet Protocol) address.
After "Welcome!" appears in the control panel of the machine, print the configuration page, and then check the IP address that has been speci- fied. Print the configuration page by pressing the buttons indicated below. [Util- ity Settings] – [User Settings] – [Print Settings] – [Print Reports] – [Config- uration Page] Install the printer driver and utilities.
Page 232
If you don’t set the gateway, go to step 5. Specify the gateway address for this machine. Specify the gateway address by pressing the buttons indicated below. [Utility Settings] – [Admin Settings] – [Ethernet] – [TCP/IP] – [Gateway] Change the setting, and then press [OK]. After specifying administrator settings, reset the printer so that it can print.
Network Printing Network printing terms are described below. AppleTalk Bonjour BOOTP DDNS DHCP HTTP IEEE802.1X IPsec IPv6 IPX/SPX LLMNR LLTD LPD/LPR SMTP SNMP Port9100 WSD print This chapter contains descriptions on the network printing terms and the IPP printing methods. AppleTalk A generic name for the protocol suite developed by Apple Computer for com- puter networking.
BOOTP BOOTP (Bootstrap Protocol) is an Internet protocol that enables a diskless workstation to discover (1) its own IP address, (2) the IP address of a BOOTP server on the network, and (3) a file that can be loaded into memory to boot the workstation.
IEEE802.1X This protocol for determining the user authentication method within the LAN is compatible with wireless and wired LANs. Using the RADIUS server for user authentication, communication with authenticated users is permitted while all communication from unauthenticated clients is blocked, excluding authentication requests.
LLTD The acronym for Link Layer Topology Discovery, which is a technology inves- tigating how the devices on the network are connected. Network devices with this technology are recognized by Windows 7/Vista/Server 2008 on the net- work, and displayed as icons configured on the network map of Windows 7/ Vista.
SMTP SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail. This protocol was originally used to send e-mail between servers; however, currently client e-mail software use it to also send e-mail to servers using POP. SNMP SNMP (Simple Network Management Protocol) is actually a set of protocols for managing complex networks.
Printing via IPP (Internet Printing Protocol) You must have administrator privileges in order to install the printer driver. If the [User Account Control] window appears when installing on Win- dows Vista/7/Server 2008/Server 2008 R2, click the [Continue] button or the [Yes] button. For IPP printing, specify the network setting.
The connected printers are detected. Select this machine. [Search Setting]: To search for printers on other networks, click this but- ton. [Update List]: To update the printer information, click this button. Select [Internet Printing] as the printing method from the pull-down list, and then click [Next].
In the [Confirm Installation Settings] dialog box, click [Install]. [Installation Settings]: To change the settings, click this button. Click [Finish]. This completes the installation of the printer driver. Adding an IPP Port using Add Printer Wizard – Windows Server 2003/XP/2000 For Windows Server 2003/XP: Click [Start], select [Printers and Faxes], and then click [Add a Printer].
Page 241
In the second dialog box, select the [Network Printer] radio button, and then choose [Next]. Windows Server 2003/XP Windows 2000 In the URL field in the next dialog box, enter the machine’s network path- name in one of the following formats, and then choose [Next]: http://ipaddress/ipp http://ipaddress:80/ipp http://ipaddress:631/ipp...
Page 242
Windows 2000—If you entered a valid path in the previous step, the fol- lowing message displays: “The server on which the KONICA MINOLTA bizhub C35 printer resides does not have the correct printer driver installed. If you want to install the driver on your local computer, click OK.”...
Adding an IPP Port using Add Printer Wizard – Windows Vista/7/Server 2008/Server 2008 R2 Click [Start], and then click [Control Panel]. Click [Printer] under [Hardware and Sound]. When using Windows 7, click [View devices and printers] under [Hard- ware and Sound]. When using Windows Server 2008 R2, click [View devices and print- ers] under [Hardware].
Page 246
In the URL field in the next dialog box enter the machine’s network path- name in one of the following formats and then choose [Next]: http://ipaddress/ipp http://ipaddress:80/ipp http://ipaddress:631/ipp If your system cannot connect to the machine, the following message appears: “Windows cannot connect to the printer. Make sure that you have typed the name correctly, and that the printer is connected to network.”...
Page 247
Click [Browse]. Locate the directory on the CD/DVD where the printer driver files are located and then click [Open]. Click [OK]. Click [OK]. 7-20 Network Printing...
Printing via Web Service Print Function In Windows Vista/7/Server 2008/Server 2008 R2, printers on the network that support Web Service print can be detected and installed. You must have administrator privileges in order to install the printer driver. Before proceeding with the installation, be sure to exit all running applications.
Making the printer driver known from the Network window To use Web service print in Windows Vista/7/Server 2008/Server 2008 R2, install the printer driver before making it known to the computer with plug and play. Install the printer driver for this machine. Install the printer driver using the installer or Add Printer Wizard.
Adding a printer from the Network window In Windows Vista/Server 2008, you can add a Web service device using the addition function of the printer after connecting this machine. In Windows 7/Server 2008 R2, a window for specifying an installation disk does not appear after the machine is connected to the computer.
Page 252
Select the device name of this machine, and then click [Install] on the tool- bar. Click [Locate and install driver software (recommended)]. Network Printing 7-25...
Page 253
If Windows Vista is being used, go to step 8. If Windows Server 2008 is being used, click [Don't search online]. Click [Browse my computer for driver software (advanced)]. 7-26 Network Printing...
Page 254
Click [Browse]. Locate the directory on the CD/DVD where the printer driver files are located and then click [OK]. Click [Next]. Click [Close]. Network Printing 7-27...
Adding a printer using Add Printer Wizard In Windows Vista/Server 2008, you can add a Web service device using the addition function of the printer after connecting this machine. In Windows 7/Server 2008 R2, a window for specifying an installation disk does not appear after the machine is connected to the computer.
Page 256
Click [Create a new port], and then select [Standard TCP/IP Port]. Click [Next]. Select [Web Services Device] and type the IP address for the machine, and then click [Next]. The [Found New Hardware] Wizard dialog box appears. Network Printing 7-29...
Page 257
Click [Locate and install driver software (recommended)]. If Windows Vista is being used, go to step 12. If Windows Server 2008 is being used, click [Don't search online]. 7-30 Network Printing...
Page 258
Click [Browse my computer for driver software (advanced)]. Click [Browse]. Locate the directory on the CD/DVD where the printer driver files and then click [OK]. Click [Next]. Click [Close]. Network Printing 7-31...
Page 259
Click [Next]. Select whether the printer driver is to be shared, and then click [Next]. 7-32 Network Printing...
Click [Finish]. This completes the installation of the printer driver. Updating the driver after connecting this machine In Windows 7/Server 2008 R2, if this machine is connected without first installing the printer driver, the printer driver will not be correctly identified. If the printer driver is not correctly identified, the driver must be updated using [Update Driver].
Page 261
Right-click the device name of the machine that is under [Unspecified] and then click [Properties]. If [Unknown Device] appears instead of the device name of the machine, right-click to remove the device, and install the printer driver. To connect this machine as described in “Making the printer driver known from the Network window”...
If the bit number differs between the server operating system and client operating system If the bit number differs between the print server's running operating system and client computer's running operating system while Windows Server 2008/ Server 2008 R2 is running on the print server, the additional driver may not be installed correctly on the print server.
Page 263
From the print server (32 bits), map the client computer (64 bits) drive (for example, “C”), specified as a shared drive in step 1, as a network drive (for example, “z”). This setting is available for only PostScript driver. Install on the print server (32 bits) the driver for a 32-bit operating system. 7-36 Network Printing...
Page 264
Right-click the printer that was installed, and then click the appropriate menu command to display printer properties. Select the [Sharing] tab, and then select the [Share this printer] check box. Click [Additional Drivers]. The [Additional Drivers] dialog box appears. Under [Processor], select the [x64] check box, and then click [OK]. Network Printing 7-37...
Page 265
Specify the folder containing the driver for a 64-bit operating system. A dialog box appears, requesting the location of the setup information file. Click [Browse], and then select the setup information file (ntprint.inf) on the client computer mapped as a network drive. This setting is available for only PostScript driver.
Troubleshooting Symptom Action Some client functions are Install the printer driver directly on the client not available with the Point computer. and Print feature when the server is running Windows Server 2008 /Windows Server 2008 R2/Server 2003 and the client com- puter is running Windows XP/Vista/2000/7.
About PageScope Web Connection This chapter provides information on PageScope Web Connection, an HTTP (HyperText Transfer Proto- col)-based web page that resides in your printer and that you can access using your Web browser. This page gives you instant access to printer status and the most frequently used printer configuration options.
Through the assigned name of the printer—This name comes from the IP host table (the filename is [hosts]) on the computer system and is usually assigned by the system administrator (for example, bizhub C35). It may be more convenient for you to use the printer name than the IP address.
Our examples represent the IP address of the printer with: xxx.xxx.xxx.xxx. Always enter your printer’s IP address without lead- ing zeros. For example, 192.168.001.002 should be entered as 192.168.1.2. Internet Explorer (version 6.0 for Windows) Start Internet Explorer. From the [Tools] menu choose [Internet Options].
Mozilla Firefox (version 2.0 for Mac OS X 10.5) Start Mozilla Firefox. From the [Firefox] menu choose [Preferences]. Click [Advanced] at the top of the dialog box. Click the [Network] tab. In the [Connection] section, click [Settings]. The Connection Settings dialog box appears.
Page 274
Understanding the PageScope Web Connection Window The illustration below identifies the navigation and configuration areas of the windows that you see in PageScope Web Connection windows. Click to refresh the information Links to main topics Click to log Login user name out of Current status current mode...
Navigation Selecting the main topic and subtopic displays the configuration area for the printer options (parameters) associated with your selections. To change a current setting, click on the current setting and then select from the available choices or enter the new value. In order to apply or save any changes made to the configuration set- tings, PageScope Web Connection must be logged in from Adminis- trator Mode.
Logging on to PageScope Web Connection Login Page User authentication, account track and language settings can be specified by using PageScope Web Connection. In order to perform authentication, you must log on in Administrator Mode. For details on authentication, refer to “[Authentication]”...
Language Setting If necessary, the display language used for Web Connection can be changed. Public User Mode In Public User Mode, you can view configuration settings but not change them. Select [Public User]. Click the [Log in] button. Registered User Mode In Registered User Mode, you can view configuration settings but not change them.
Type in the user name and user password in the [User Name] and [User Password] text boxes. If [Account Track] (in the [Security] - [Authentication] - [General Settings] page) is set to [On], continue with step 4. If it is set to [Off], continue with step 5.
Administrator Mode In order to change any configuration settings through PageScope Web Con- nection, you must first enter Administrator Mode. Select [Administrator]. Click the [Log in] button. Type the password in the [Administrator Password] text box. Default password is set to “12345678”; however, once you have logged on in Administrator Mode, the password can be specified in the [Security] - [Administrator Password] window.
Configuring the Printer In order to make any configuration changes through PageScope Web Con- nection, you must first enter Administrator Mode. See “Administrator Mode” on page 8-12. for instructions on logging into Administrator Mode. [System] tab This page allows you to configure several user- and printer-specific items. Configuring the Printer 8-13...
[Device Information] [Summary] (previous page) The [System] - [Device Information] - [Summary] window provides the follow- ing information. Item Description [Memory] Displays the amount of memory installed in the printer. [HDD] Displays [Installed]. [Fax Board] Displays [Installed]. [Duplex] Displays [Installed]. [Paper Source] Identifies the paper feed units installed on the printer.
[Paper Source] The [System] - [Device Information] - [Paper Source] window provides the fol- lowing information. Item Description [Paper Source] Identifies the paper feed units Tray 1/2/3/4 installed on the printer. [Paper Size] Indicates the size of paper loaded in a specific tray. [Paper Type] Indicates the type of paper loaded in a specific tray.
Page 283
[Output Tray] The [System] - [Device Information] - [Output Tray] window provides the fol- lowing information. Item Description [Name] Displays the name of the output tray. [Status] Displays the status ([Ready], [Full]) of the output tray. [Capacity] Displays the maximum capacity for the output tray. 8-16 Configuring the Printer...
Page 284
[Storage] The [System] - [Device Information] - [Storage] window provides the following information. Item Description [Total] Displays the total amount of space on the hard disk. [Used] Displays the amount of space on the hard disk that is used. [Remaining] Displays the amount of space remaining on the hard disk.
Page 285
[Interface Information] The [System] - [Device Information] - [Interface Information] window provides the following information. Item Description [Protocol [TCP/IP] If [Enable] is displayed, TCP/IP is enabled. Informa- If [Disable] is displayed, TCP/IP is disabled. tion] [SMTP] If [Enable] is displayed, SMTP is enabled. If [Disable] is displayed, SMTP is disabled.
Page 286
Item Description [FTP TX] If [Enable] is displayed, FTP TX is enabled. If [Disable] is displayed, FTP TX is disabled. [FTP Server] If [Enable] is displayed, the FTP server func- tion is enabled. If [Disable] is displayed, the FTP server function is disabled.
Page 287
Item Description [Network [Type] Identifies the type of network interface Informa- installed on the printer (Ethernet 10Base-T/ tion] 100Base-TX/1000Base-T). [Ethernet Speed] Indicates the transmission speed for the net- work and the transmission method for bidi- rectional transmission. [IP Address] Identifies the IP (Internet Protocol) address of the Ethernet interface.
Page 288
[Consumables] The [System] - [Device Information] - [Consumables] window provides the fol- lowing information. Item Description [Name] Identifies the type of consumable that is being moni- tored. [Status] Indicates the remaining life of the consumables. Toner Cartridge, Imaging Unit, Transfer Belt, Transfer Roller, Fuser Unit: Percentage The percentages remaining for the consumables may be different from the actual...
[Counter] [Total Counter] The [System] - [Counter] - [Total Counter] page provides the following infor- mation. Item Description Total Counter Displays the total number of pages that have been printed by this machine. Copy Counter Displays the number of pages that have been cop- ied.
Page 290
[Sheets Printed by Paper Size] The [System] - [Counter] - [Sheets Printed by Paper Size] page shows the number of pages of each paper size that was used by this machine. [Sheets Printed by Paper Type] The [System] - [Counter] - [Sheets Printed by Paper Type] page shows the number of pages of each paper type that was used by this machine.
[Product Help URL] Sets the help web site address for printer assis- tance. Range: Up to 127 characters Default: http://pagescope.com [Corporate URL] Sets the KONICA MINOLTA corporate web site address. Range: Up to 127 characters Default: http://konicaminolta.com 8-24 Configuring the Printer...
Page 292
Item Description [Supplies and Acces- Sets the web address where you can purchase sories] printer supplies and accessories. Range: Up to 127 characters Default: [Blank] [Contact Utility Link] Specifies the link to the Printer Management Utili- ties. Range: Up to 127 characters Default: http://pagescope.com [Driver URL] Specify where the printer driver is saved.
[Import/Export] This page appears when [Job Log] (in the [System] - [Machine Set- tings] page) is set to [Enable]. [Job Log] The [System] - [Import/Export] - [Job Log] window allows you to configure the following items. This page appears when [Job Log] (in the [System] - [Machine Set- tings] page) is set to [Enable].
Page 294
[Authentication] The [System] - [Import/Export] - [Authentication] window allows you to config- ure the following items. This page appears when [User Authentication] (in the [Security] - [Authentication] - [General Settings] page) is set to [Device] or [Exter- nal Server]. Item Description [Import] Text Box Type in the name of the file containing the registered...
Page 295
[Address] The [System] - [Import/Export] - [Address] page allows you to configure the following items. Item Description [Import] Type in the name of the file containing the registered destination information to be imported. [Browse] button Click to search for the file containing the registered destination information.
[Date/Time Settings] This menu item appears only if the user has logged on to Administra- tor mode. [Manual Settings] The [System] - [Date/Time Settings] - [Manual Settings] window allows you to configure the following items: Item Description [Year] Specifies the year for the printer’s internal clock. Range: [2000] - [2032] Configuration Menu Equivalent: [Admin Settings] - [Machine Settings] - [Date &...
Page 297
Item Description [Day] Specifies the day for the printer’s internal clock. Range: [1] - [31] Configuration Menu Equivalent: [Admin Settings] - [Machine Settings] - [Date & Time Settings] - [Date] [Hour] Specifies the hour for the printer’s internal clock. Range: [0] - [23] Configuration Menu Equivalent: [Admin Settings] - [Machine Settings] - [Date &...
Page 298
[Time Adjustment Settings] The [System] - [Date/Time Settings] - [Time Adjustment Settings] window allows you to configure the following items: Item Description [Time Adjustment] Select whether or not the time is automatically adjusted with NTP. Choices: [Enable], [Disable] Default: [Disable] [NTP Server Address] Specifies the NTP server address.
Page 299
Item Description [Adjustment Time] Shows the last modification date and time. Default: [Unknown] [Daylight Saving Time Settings] The [System] - [Date/Time Settings] - [Daylight Saving Time Settings] page allows you to configure the following items. Item Description [Daylight Saving Time] Select whether or not daylight saving time is observed.
[Machine Settings] The [System] - [Machine Settings] - [Machine Settings] window allows you to configure the following items: Item Description [Device Name] Specify the name of the printer. Range: Up to 127 characters Default: [Blank] [Device Location] Specify the setup location for the printer. Range: Up to 127 characters Default: [Blank] [Device Information]...
Page 301
Item Description [Do Startup Page] Select whether or not a startup page is printed when the printer is turned on. Choices: [On], [Off] Default: [Off] Configuration menu equivalent: [Admin Settings] - [Print Settings] - [Startup Page Setting] [Unit of Measure] Select the measurement units used to indicate lengths.
[ROM Version] The [System] - [ROM Version] - [ROM Version] window provides the following information. This menu item appears only if the user has logged on to Administra- tor mode. Item Description [Controller ROM Ver- Displays the ROM version of the printer controller. sion] [Engine ROM Version] Displays the ROM version of the printer engine.
[Maintenance] This menu item appears only if the user has logged on to Administra- tor mode. [Clear Settings] The [System] - [Maintenance] - [Clear Settings] page allows you to reset the printer settings to its factory defaults. Item Description [System Settings] Resets the system settings to their defaults.
Page 304
Item Description [Clear] button When clicked, the message [Is it OK to restore Fac- tory Defaults?] appears. Click [OK] to automatically restart the printer and return the settings to their default values. [Reset] The [System] - [Maintenance] - [Reset] page allows you to reset the printer controller.
[Notification Settings] This menu item appears only if the user has logged on to Administra- tor mode. [Status Notification Settings] The [System] - [Notification Settings] - [Status Notification Settings] window allows you to configure the following items: Item Description [IP Address] [Notification Specify the IP address of the SNMP trap Address]...
Page 306
Item Description [IPX Address] [Notification Specify the IPX address of the SNMP trap Address] receiver. Range: 8 characters Default: [00000000] [Node Specify the node address of the SNMP Address] trap receiver. Range: 12 characters Default: [000000000000] [Community Specify the community name for the Name] SNMP trap.
Page 307
Item Description [Output Tray Specifies whether or not a notification is Full] sent when the output tray has become full. Choices: [Enable], [Disable] Default: [Enable] [Fuser Unit Specifies whether or not a notification is End] sent when the fuser unit has reached the end of its service life.
Page 308
[Total Counter Notification Settings] The [System] - [Notification Settings] - [Total Counter Notification Settings] page allows you to configure the following items. Configuring the Printer 8-41...
Page 309
Item Description [Total Counter [Model Name] Specify the model name that appears in Notification Set- e-mail messages sent as notifications of tings] the total counter for this machine. [Schedule Set- [Schedule 1]/ Specify settings for the notification sched- ting] [Schedule 2] ules.
[Security] tab From the [Security] tab, all settings related to user authentication and network security can be specified. The [Security] tab appears only if the user has logged on to Adminis- trator mode. If a setting is changed for any of the following parameters, all regis- tered user/account information as well as job data/images related to users/accounts are cleared.
Page 311
Item Description [User Authentication] Select whether or not user authentication is per- formed. [Device]: Select this setting for user authentication to be performed by the machine. [External Server]: Select this setting for user authentication to be performed by an external server.
Page 312
[User List] This menu item appears when [User Authentication] (in the [Security] - [Authentication] - [General Settings] page) is set to [Device] or [Exter- nal Server]. The [Security] - [Authentication] - [User List] page allows you to configure the following items. Item Description [Search for Number]...
Page 313
[User List] ([New Registration]/[Edit]) The [Security] - [Authentication] - [User List] - [New Registration] page allows you to configure the following items. Item Description [User Registra- [No.] Displays the registration number for the tion] new user. [User Name] Specify the name of the new user. Range: Up to 64 characters Default: [Blank] A user name that already exists...
Page 314
Item Description [External Displays the name of the external server Server Name] that performed authentication. This item appears only if the following setting has been specified in the [Security] - [Authentication] - [General Settings] page. [User Authentication]: Select [External Server]. [E-mail Specify the e-mail address of the new Address]...
Page 315
Item Description [Max. Allowance Set] Specify the maximum number of pages that can be printed. To specify a limit, select the appropriate check box, and then type in the desired maximum value. [Authentication Device Settings] Shows whether or not an authentication device has been registered.
Page 316
[Account Track List] This menu item appears when [Account Track] (in the [Security] - [Authentication] - [General Settings] page) is set to [On]. The [Security] - [Authentication] - [Account Track List] page allows you to con- figure the following items. Item Description [Search for Number]...
Page 317
[Account Track List] ([New Registration]/[Edit]) The [Security] - [Authentication] - [Account Track List] - [New Registration] page allows you to configure the following items. Item Description [Account Track [No.] Displays the registration number for the Registration] new account. [Account Specify the name of the new account. Name] Range: Up to 8 characters Default: [Blank]...
Page 318
[External Server List] This menu item appears when [User Authentication] (in the [Security] - [Authentication] - [General Settings] page) is set to [External Server]. The [Security] - [Authentication] - [External Server List] page allows you to configure the following items. Item Description [No.]...
Page 319
[External Server List] ([Edit]) The [Security] - [Authentication] - [External Serve List] - [Edit] page allows you to configure the following items. Item Description [External Server [No.] Displays the registration number for the (Active Direc- external server. tory)] Range: 1 to 20 [Name] Specify the name of the external server.
Page 320
Item Description [Default Type in the NTML default domain name. Domain Name] Range: Up to 64 characters [External Server [No.] Displays the registration number for the (NDS)] external server. Range: 1 to 20 [Name] Specify the name of the external server. Range: Up to 32 characters Default: [Blank] [Server Type]...
Page 321
Item Description [Port Number Specify the SSL port number. (SSL)] Range: [1] to [65535] Default: [636] [Search Base] Specify the starting point for searching directories in the LDAP server. Searches are performed by also including the sub-directories of the specified start- ing point.
Page 322
[Public User Registration] This menu item does not appear if public user access is not permitted. The [Security] - [Authentication] - [Public User Registration] page allows you to configure the following items. Item Description [Function Permission] Select whether to permit [Copy], [Scan to Network], [Scan to HDD], [Scan to USB Memory], [Fax], [Print], [Manual Destination Input].
[ID & Print Settings] [ID & Print & Print Settings] This menu item appears in the following cases. - When [User Authentication] (in the [Security] - [Authentication] - [General Settings] page) is not set to [Off] - When PageScope Authentication Manager is used for authentication The [Security] - [ID &...
[Authentication Device Settings] This menu item appears only if a loadable driver has been installed for operating an authentication device. [General Settings] When a setting on this page is changed, the card information saved on the printer is erased. From the [General Settings] page, basic settings can be specified for per- forming authentication using an authentication device.
Page 325
[MIFARE Settings] Specify MIFARE settings. This menu item appears only if the loadable driver supports MIFARE. When a setting on this page is changed, the card information saved on the printer is erased. The [Security] - [Authentication Device Settings] - [MIFARE Settings] page allows you to configure the following items.
Page 326
[LEGIC Settings] Specify LEGIC settings. This menu item appears only if the loadable driver supports LEGIC. When a setting on this page is changed, the card information saved on the printer is erased. The [Security] - [Authentication Device Settings] - [LEGIC Settings] page allows you to configure the following items.
Page 327
[FeliCa (SSFC) Settings] Specify FeliCa (SSFC) settings. This menu item appears only if the loadable driver supports FeliCa (SSFC). When a setting on this page is changed, the card information saved on the printer is erased. The [Security] - [Authentication Device Settings] - [FeliCa (SSFC) Settings] page allows you to configure the following items.
Page 328
Item Description [Area Code] Specify the region number. Range: 0 to 65535 Default: [0] [Security Level] Select the security level. Range: 0 to 65535 Default: [0] [Company Iden- [Code 1] to Specify the company identification code. tification Code] [Code 10] Default: [0] [Company Code] Specify the company code.
The [Security] - [Authentication Device Settings] - [HID (iCLASS) Settings] page allows you to configure the following items. Item Description [ID Length] Select the key to be used for access. Range: 1 to 16 Default: [8] [PKI Settings] [Device Certificate] The [Security] - [PKI Settings] - [Device Certificate] page allows you to config- ure the following items.
Page 330
[Issued To] Displays the destination where the device certificate was issued. [Expiration Date] Displays the expiration date of the device certifi- cate. [Detail] button Click to view detailed information about the device certificate. [Edit] button Click to edit information for the device certificate. [Device Certificate] ([New Registration]) The [Security] - [PKI Settings] - [Device Certificate] - [New Registration] page allows you to configure the following items.
Page 331
Item Description [Organization Specify the name of the department. Unit] Range: Up to 63 characters [Locality] Specify the name of the municipality. Range: Up to 127 characters [State/Prov- Specify the name of the state or province. ince] Range: Up to 127 characters [Country] Specify the name of the country as a country code regulated by ISO03166.
Page 332
Item Description [Import a Certifi- [File] Specify the file name of the device certifi- cate] cate to be imported. Click [Browse] to specify where to save the certificate file. [Password] Type in the password to decode an encrypted certificate file. Range: Up to 32 characters [Retype Pass- Re-type the password for confirmation.
Page 333
[Device Certificate] ([Edit]) The [Security] - [PKI Settings] - [Device Certificate] - [Edit] page allows you to configure the following items. Item Description [Certificate Information] Select to view detailed information about the device certificate. [Export a Certifi- [Password] Type in the password to decode an cate] encrypted certificate file.
Page 334
[SSL/TLS Settings] The [Security] - [PKI Settings] - [SSL/TLS Settings] page allows you to config- ure the following items. Item Description [SSL/TLS] Select the SSL transmission mode. Default: [Enable] [Encryption Strength] Select the SSL encryption strength. Choices: [AES-256], [AES-256, 3DES], [AES-256, 3DES, RC4-128], [AES-256, 3DES, RC4-128, DES, RC4-40] Default: [AES-256, 3DES, RC4-128, DES, RC4-40]...
Page 335
[Protocol Settings] The [Security] - [PKI Settings] - [Protocol Settings] page allows you to config- ure the following items. Item Description [Protocol] Displays the classification for each protocol. [Issued By] Displays the issuer of the device certificate. If no device certificates have been registered, [Not Installed] appears.
Page 336
[Protocol Settings] ([Edit] (IEEE802.1X)) Clicking [Edit] for the IEEE802.1X protocol in the [Security] - [PKI Settings] - [Protocol Settings] page allows you to configure the following items. Item Description [Protocol Settings] Displays the name of the selected protocol. [Certificate Verification Specify settings for verifying the server certificate.
Page 337
[Protocol Settings] ([Edit] (S/MIME)) Clicking [Edit] for the S/MIME protocol in the [Security] - [PKI Settings] - [Pro- tocol Settings] page allows you to configure the following items. Item Description [Protocol Settings] Displays the name of the selected protocol. [Device Certificate] Select the certificate to be used.
Page 338
[Protocol Settings] ([Edit] (HTTP Server)) Clicking [Edit] for the HTTP Server protocol in the [Security] - [PKI Settings] - [Protocol Settings] page allows you to configure the following items. Item Description [Protocol Settings] Displays the name of the selected protocol. [Device Certificate] Select the certificate to be used.
Page 339
[Protocol Settings] ([Edit] (E-Mail Send (SMTP)) Clicking [Edit] for the E-Mail Send (SMTP) protocol in the [Security] - [PKI Settings] - [Protocol Settings] page allows you to configure the following items. Item Description [Protocol Settings] Displays the name of the selected protocol. [Certificate Verification Specify settings for verifying the server certificate.
Page 340
[Protocol Settings] ([Edit] (E-Mail Receive (POP))) Clicking [Edit] for the E-Mail Send (POP) protocol in the [Security] - [PKI Set- tings] - [Protocol Settings] page allows you to configure the following items. Item Description [Protocol Settings] Displays the name of the selected protocol. [Certificate Verification Specify settings for verifying the server certificate.
Page 341
[Protocol Settings] ([Edit] (TCP Socket)) Clicking [Edit] for the TCP Socket protocol in the [Security] - [PKI Settings] - [Protocol Settings] page allows you to configure the following items. Item Description [Protocol Settings] Displays the name of the selected protocol. [Device Certificate] Select the certificate to be used.
Page 342
[Protocol Settings] ([Edit] (LDAP)) Clicking [Edit] for the LDAP protocol in the [Security] - [PKI Settings] - [Proto- col Settings] page allows you to configure the following items. Item Description [Protocol Settings] Displays the name of the selected protocol. [Certificate Verification Specify settings for verifying the server certificate.
Page 343
[Protocol Settings] ([Edit] (WebDAV Client)) Clicking [Edit] for the WebDAV Client protocol in the [Security] - [PKI Settings] - [Protocol Settings] page allows you to configure the following items. Item Description [Protocol Settings] Displays the name of the selected protocol. [Certificate Verification Specify settings for verifying the server certificate.
Page 344
[Protocol Settings] ([Edit] (OpenAPI)) Clicking [Edit] for the OpenAPI protocol in the [Security] - [PKI Settings] - [Protocol Settings] page allows you to configure the following items. Item Description [Protocol Settings] Displays the name of the selected protocol. [Certificate Verification Specify settings for verifying the server certificate.
Page 345
[Protocol Settings] ([Edit] (Web Service)) Clicking [Edit] for the Web Service protocol in the [Security] - [PKI Settings] - [Protocol Settings] page allows you to configure the following items. Item Description [Protocol Settings] Displays the name of the selected protocol. [Certificate Verification Specify settings for verifying the server certificate.
Page 346
[External Certificate] The [Security] - [PKI Settings] - [External Certificate] page allows you to con- figure the following items. Item Description [New Registration] but- Click to register a new external certificate. [Certification Type] Select the type of external certificates to be dis- played.
Page 347
[External Certificate] ([New Registration]) Clicking [New Registration] in the [Security] - [PKI Settings] - [External Certifi- cate] page allows you to configure the following items. Item Description [Import a Certificate] Import an external certificate. [Certification Select the type of external certificate to be regis- Type] tered.
Page 348
[Validate Certificate] The [Security] - [PKI Settings] - [Validate Certificate] page allows you to con- figure the following items. Item Description [Certificate Veri- [Certificate Select whether or not certificate verifica- fication Settings] Verification] tion is performed. [Timeout] Specify the timeout period for expiration date confirmation.
Page 349
Item Description [Proxy Settings] [Proxy Server To confirm the expiration date via a proxy Address] server, enter its address. Specify the LDAP server address. An IPv4 address, IPv6 address or FQDN (fully qualified domain name) can be specified. Range: Up to 255 characters Default: [0.0.0.0] [Proxy Server Specify the port number of the proxy...
[IPsec] The [Security] - [IPsec] - [IPsec] page allows you to configure the following items. Item Description [General Set- [IPsec] Displays whether or not the IPsec func- tings] tion is enabled. [IKE Life Time] Displays the length of the life for the IKE. [IKE Dif- Displays the IKE Diffie-Hellman group.
Page 351
[General Settings] ([Edit]) The [Security] - [IPsec] - [IPsec] - [General Settings] - [Edit] page allows you to configure the following items. Item Description [IPsec] Select whether or not to enable the IPsec function. Choices: [Enable], [Disable] Default: [Disable] [IKE Life Time] Specify the length (in seconds) of the life for the IKE.
Page 352
[IKE Settings] ([Edit]) The [Security] - [IPsec] - [IPsec] - [IKE Settings] - [Edit] page allows you to configure the following items. Item Description [No.] Displays the number to be registered. [Encryption Algorithm] Select the encryption algorithm to be used when creating a control tunnel.
Page 353
[IPsec SA Settings] ([Edit]) The [Security] - [IPsec] - [IPsec] - [IPsec SA Settings] - [Edit] page allows you to configure the following items. Item Description [No.] Displays the number to be registered. [Security Protocol] Select the security protocol. Choices: [AH], [ESP], [ESP & AH] Default: [AH] [Encryption Algorithm When [Security Protocol] is set to [ESP], select the...
Page 354
Item Description [Authentication Algo- When [Security Protocol] is set to [AH], select the rithm for AH] AH authentication algorithm. Choices: [MD5], [SHA-1] Default: [MD5] [IPsec Peer Settings] ([Edit]) The [Security] - [IPsec] - [IPsec] - [IPsec Peer Settings] - [Edit] page allows you to configure the following items.
Item Description [Perfect Forward To increase the IKE strength, select [Use]. Secrecy] Choices: [Not Use], [Use] Default: [Not Use] [Pre-Shared Key] Specify the pre-shared key text shared with the peer. Range: Up to 64 characters Default: [Blank] [IP Address Filtering] [IP Address Filtering] The [Security] - [IP Address Filtering] - [IP Address Filtering] page allows you to configure the following items.
Page 356
Item Description [Access Permission Address] To specify addresses being permitted access, select [Enable]. Choices: [Enable], [Disable] Default: [Disable] Range of IP Specify the starting and ending address per- addresses of ranges being permitted mitted access access. Format: *.*.*.* (The asterisks (*) indicate numbers between 0 and 255.) Default: [0.0.0.0] To specify a single IP address, type...
Page 357
Item Description [Access Refuse Address] To specify addresses being denied access, select [Enable]. Choices: [Enable], [Disable] Default: [Disable] Range of IP Specify the starting and ending address addresses of ranges being denied refused access access. Format: *.*.*.* (The asterisks (*) indicate numbers between 0 and 255.) Default: [0.0.0.0] To specify a single IP address, type...
[IEEE802.1X] [IEEE802.1X] The [Security] - [IEEE802.1X] - [IEEE802.1X] page allows you to configure the following items. Item Description [IEEE802.1X] Select whether or not to enable the IEEE802.1X function. Choices: [Enable], [Disable] Default: [Disable] [EAP Type] Select the type of authentication used with IEEE802.1X.
Page 359
Item Description [Password] Select [Change Password] to change the password. If [EAP Type] is set to [EAP-MD5], [EAP-TTLS], [PEAP] or [Server Specifica- tion], specify the password. Range: Up to 128 characters Default: [Blank] [TTLS Anonymous Name] Specify the logon name used with EAP-TTLS primary authentication.
Page 360
Item Description [Server ID] Specify the characters used for verifica- tion through backward matching with the CN attributes of the server certificate. If [EAP Type] is set to [EAP-TLS], [EAP-TTLS], [PEAP] or [Server Specifica- tion], specify the server ID. Range: Up to 64 characters Default: [Blank] [Encryption Strength] Select the encryption level of TLS pack-...
[Limiting Access to Destination] [Restrict User Access] The [Security] - [Limiting Access to Destination] - [Restrict User Access] page allows you to configure the following items. Item Description [Registering and Select whether or not to prohibit users from register- Changing Addresses] ing or editing destinations.
[Auto Logout] [Auto Logout] The [Security] - [Auto Logout] - [Auto Logout] page allows you to configure the following items. Item Description [Admin Mode Logout Specify the length of time to automatically log off Time] from Administrator mode. Range: 1 to 60 (minutes) Default: [10] [User Mode Logout Specify the length of time to automatically log off...
[Administrator Password] [Administrator Password] The [Security] - [Administrator Password] - [Administrator Password] page allows you to configure the following items. This menu item does not appear if there is no HTTPS connection or if [Enhanced Security Mode] is set to [On]. Item Description [Current Password]...
[Job] tab This page allows you to view the status of current print jobs. [Current Jobs] [Print] (shown above) The [Job] - [Current Jobs] - [Print] page allows you to configure the following items. Item Description [No.] Displays the identification number of the print job. Each print job that the printer receives is assigned a unique identification number.
Page 365
[Send] The [Job] - [Current Jobs] - [Send] page allows you to configure the following items. Item Description [No.] Displays the identification number of the transmis- sion job. Each job sent by the printer is assigned a unique identification number. [User Name] Displays the name of the owner for the transmission job, if known.
Page 366
[Receive] The [Job] - [Current Jobs] - [Receive] page allows you to configure the follow- ing items. Item Description [No.] Displays the identification number of the reception job. Each job received by the printer is assigned a unique identification number. [User Name] Displays the name of the owner for the reception job, if known.
Page 367
[Save] The [Job] - [Current Jobs] - [Save] page allows you to configure the following items. Item Description [No.] Displays the identification number of the stored job. Each job stored on the printer is assigned a unique identification number. [User Name] Displays the name of the owner for the stored job, if known.
[Job History] [Print] The [Job] - [Job History] - [Print] page allows you to configure the following items. Item Description [No.] Displays the identification number of the print job. Each print job that the printer receives is assigned a unique identification number. [User Name] Displays the name of the owner for the print job, if known.
Page 369
[Send] The [Job] - [Job History] - [Send] page allows you to configure the following items. Item Description [No.] Displays the identification number of the transmis- sion job. Each job sent by the printer is assigned a unique identification number. [User Name] Displays the name of the owner for the transmission job, if known.
Page 370
[Receive] The [Job] - [Job History] - [Receive] page allows you to configure the follow- ing items. Item Description [No.] Displays the identification number of the reception job. Each job received by the printer is assigned a unique identification number. [User Name] Displays the name of the owner for the reception job, if known.
Page 371
[Save] The [Job] - [Job History] - [Save] page allows you to configure the following items. Item Description [No.] Displays the identification number of the stored job. Each job stored on the printer is assigned a unique identification number. [User Name] Displays the name of the owner for the stored job, if known.
Page 372
[Job History] ([Detail]) The [Job] - [Job History] - [Detail] window provides the following information for the selected job. As an example, a description of the [Job] - [Job History] - [Print] - [Detail] page is provided below. Item Description [No.] Displays the identification number of the print job.
Item Description [Result] Displays the result of the print job (OK, Error, or Canceled) [Time Stored] Displays the time that the job was queued. [Time Finished] Displays the time that printing finished. [OK] button Click to return to the previous page. [Communication List] [Scan] The [Job] - [Communication List] - [Scan] page allows you to configure the fol-...
Page 374
[Fax TX] The [Job] - [Communication List] - [Fax TX] page allows you to configure the following items. Item Description [No.] Displays the transmission ID. [Destination] Displays the transmission recipient. [Start Time] Displays the time that the job started. [Result] Displays the results of the job.
Page 375
[Fax RX] The [Job] - [Communication List] - [Fax RX] page allows you to configure the following items.. Item Description [No.] Displays the transmission ID. [Destination] Displays the transmission recipient. [Start Time] Displays the time that the job started. [Result] Displays the results of the job.
Page 376
[Communication List] ([Detail]) The [Job] - [Communication List] - [Detail] window provides the following information for the selected job. As an example, the [Job] - [Communication List] - [Scan] - [Detail] page is shown. Item Description [No.] Displays the transmission ID. [Destination] Displays the transmission recipient.
[Print] tab This page allows more detailed printer settings to be specified. [Default Settings] [General Settings] The [Print] - [Default Settings] - [General Settings] window allows you to con- figure the following items: The settings on this page can be changed only if the user has logged on to Administrator mode.
Page 378
Item Description [Paper Source] The paper tray that is normally used can be speci- fied. Choices: [Tray1], [Tray2], [Tray3], [Tray4] Default: [Tray2] Configuration Menu Equivalent: [Admin Settings] - [Copy Settings] - [Paper Priority] [Tray3] and [Tray4] appear only if an optional lower feeder unit is installed.
Page 379
Item Description [Width] Specifies the paper width when [Paper Size] is set to [Custom Size]. Range: 3.63 - 8.50 (inch) / 92 - 216 (mm) Configuration Menu Equivalent: [User Settings] - [Print Settings] - [Paper Settings] - [Paper Tray Settings] - [Tray1] - [Custom Size] - [Width] [Length] Specifies the paper length when [Paper Size] is set...
Page 380
Item Description [Auto Continue] Select whether or not printing continues if the size or type of paper in the selected paper tray is different from the size or type of paper for the print job. Choices: [On], [Off] Default: [Off] Configuration menu equivalent: [Admin Settings] - [Print Settings] - [Auto Continue]...
Page 381
[Paper Source Settings] The [Print] - [Default Settings] - [Paper Source Settings] window allows you to configure the following items: Some settings on this page can be changed only if the user has logged on to Administrator mode. Item Description [Tray1] [Paper Size] Specifies the setting for the size of paper...
Page 382
Item Description [Width] Specifies the paper width when [Paper Size] is set to [Custom Size]. Range: 3.63 - 8.50 (inch) / 92 - 216 (mm) Configuration Menu Equivalent: [User Settings] - [Printer Settings] - [Paper Settings] - [Paper Tray Settings] - [Tray1] - [Custom Size] - [Width] [Length] Specifies the paper length when [Paper...
Page 383
Item Description [Tray2] [Paper Size] Specifies the setting for the size of paper loaded into Tray 2. Default: [Letter] (120V model) [A4] (other model) Configuration Menu Equivalent: [User Settings] - [Printer Settings] - [Paper Settings] - [Paper Tray Settings] - [Tray2] - [Paper Size] [Width] Specifies the paper width when [Paper...
Page 384
Item Description [Tray3] [Paper Size] Displays the setting for the size of paper loaded into Tray 3. This item appears only if Configuration Menu Equivalent: an optional lower [User Settings] - [Printer feeder unit is Settings] - [Paper Settings] - installed.
Page 385
Item Description [Tray Chaining] [Tray Chaining] If [Enable] is selected and the specified paper tray runs out of paper during print- ing, a paper tray loaded with paper of the same size is automatically selected so printing can continue. If [Disable] is selected and the specified paper tray runs out of paper, printing stops.
Page 386
The settings on this page can be changed only if the user has logged on to Administrator mode. Item Description [Tray Mapping Mode] Select whether or not the Tray Mapping function is used. Choices: [On], [Off] Default: [Off] Configuration Menu Equivalent: [User Settings] - [Print Settings] - [Paper Settings] - [Tray Mapping] - [Tray Mapping Mode]...
Page 387
[PCL Settings] The [Print] - [Default Settings] - [PCL Settings] window allows you to config- ure the following items: The settings on this page can be changed only if the user has logged on to Administrator mode. Item Description [PCL Set- [Font Number] Specify the default font in the PCL lan- tings]...
Page 388
Item Description [Symbol Set] Select the symbol set used with the PCL language. Default: [PC-8] Configuration menu equivalent: [Admin Settings] - [Print Set- tings] - [Emulation] - [PCL] - [Font Source] - [Symbol Set] [Lines Per Page] Specify the number of lines per page in the PCL language.
Page 389
Item Description [CL/LF Mapping] Select the definitions of the CR/LF codes in the PCL language. Choices: [CR=CR LF=LF], [CR=CRLF LF=LF], [CR=CR LF=LFCR], [CR=CRLF LF=LFCR] Default: [CR=CR LF=LF] Configuration menu equivalent: [Admin Settings] - [Print Set- tings] - [Emulation] - [PCL] - [CR/LF Mapping] [Print Qual- [Contrast]...
Page 390
Item Description [Text [Source] Select the color space for RGB data. Printing] Choices: [Device Color], [sRGB] Default: [sRGB] Configuration menu equivalent: [Admin Settings] - [Print Set- tings] - [Quality Settings] - [PCL Settings] - [Text Printing] - [RGB Source] [Intent] Select the characteristic applied when converting RGB data to CMYK data.
Page 391
[PostScript Settings] The [Print] - [Default Settings] - [PostScript Settings] window allows you to configure the following items: The settings on this page can be changed only if the user has logged on to Administrator mode. Item Description [PostScript [Wait Timeout] Specify the length of time until Postscript Settings] times out.
Page 392
Item Description [PS Protocol] Select the PS protocol. Choices: [Auto], [Normal], [Binary] Default: [Auto] Configuration menu equivalent: [Admin Settings] - [Print Set- tings] - [Emulation] - [Postscript] - [PS Protocol] [Print to PS Error] Select whether or not error printing is per- formed.
Page 393
Item Description [Black Overprint] Select whether black objects are printed (superimposed) on a neighboring color in order to prevent white space around black characters or figures. If [Text/Graphic] is selected, superim- posed printing is applied to text and graphics. If [Text] is selected, superimposed printing is applied to text.
Page 394
Item Description [Print Qual- [Image [RGB Select the color space for RGB data. ity Settings] Printing] Source] Choices: [Device Color], [sRGB], [AppleRGB], [AdobeRGB1998], [Color- MatchRGB], [BlueAdjustRGB], [Custom Profile] Default: [sRGB] Configuration menu equivalent: [Admin Settings] - [Print Set- tings] - [Quality Settings] - [PS Settings] - [Image Printing] - [RGB Source] With [Custom Profile], the name of...
Page 395
Item Description [Text [RGB Select the color space for RGB data. Printing] Source] Choices: [Device Color], [sRGB], [AppleRGB], [AdobeRGB1998], [Color- MatchRGB], [BlueAdjustRGB], [Custom Profile] Default: [sRGB] Configuration menu equivalent: [Admin Settings] - [Print Set- tings] - [Quality Settings] - [PS Settings] - [Text Printing] - [RGB Source] With [Custom Profile], the name of...
Page 396
Item Description [Graph- [RGB Select the color space for RGB data. ics Print- Source] Choices: [Device Color], [sRGB], ing] [AppleRGB], [AdobeRGB1998], [Color- MatchRGB], [BlueAdjustRGB], [Custom Profile] Default: [sRGB] Configuration menu equivalent: [Admin Settings] - [Print Set- tings] - [Quality Settings] - [PS Settings] - [Graphics Printing] - [RGB Source] With [Custom Profile], the name of...
Page 397
Item Description [Simula- [Profile] Select the specific ICC simulation profile tion] to be used for the printed output. Choices: [None], [SWOP], [Euroscale], [CommercialPress], [JapanColor], [TOYO], [DIC], [Custom Profile] Default: [None] Configuration menu equivalent: [Admin Settings] - [Print Set- tings] - [Quality Settings] - [PS Settings] - [Simulation] - [Simu- lation Profile] With [Custom Profile], the name of...
Page 398
[XPS Settings] The [Print] - [Default Settings] - [XPS Settings] window allows you to config- ure the following items: The settings on this page can be changed only if the user has logged on to Administrator mode. Item Description [Digital Signature] Specify whether to verify digital signature.
Page 399
[Print Quality Settings] The [Print] - [Default Settings] - [Print Quality Settings] window allows you to configure the following items: The settings on this page can be changed only if the user has logged on to Administrator mode. Item Description [Print [Color Mode] If [Color] is selected, the pages are printed...
Page 400
Item Description [Color Separation] If [On] is selected, color separation is per- formed. If [Off] is selected, color separation is not performed. Choices: [On], [Off] Default: [Off] Configuration Menu Equivalent: [Admin Settings] - [Print Settings] - [Quality Settings] - [Color Separation] [Brightness] Specifies the brightness of the printed...
Page 401
Item Description [Edge Enhance- Select whether image/text/graphics edges ment (Image/Text/ are emphasized. Graphics Print- If [On] is selected, the edges are empha- ing)] sized. If [Off] is selected, the edges are not empha- sized. Choices: [On], [Off] Default: [Off] (Image) [On] (Text / Graphics) Configuration Menu Equivalent: [Admin Settings] - [Print Settings] -...
Page 402
Item Description [Calibra- [Tone Calibration] If [On] is indicated, image adjustments are tion Set- applied. tings] If [Off] is indicated, image adjustments are not applied. Choices: [On], [Off] Default: [On] Configuration Menu Equivalent: [Admin Settings] - [Print Settings] - [Quality Settings] - [Gradation Adjust] - [Tone Calibration] [Cyan]/[Magenta]/ Specifies the density of the highlight color.
[Font/Form] [PCL Font] (shown above) The [Print] - [Font/Form] - [PCL Font] page provides the following information. Item Description [No.] Displays the control number of the font. [Font Name] Displays the name of the font. [Source] Displays the location of the font. 8-136 Configuring the Printer...
Page 404
[PostScript Font] The [Print] - [Font/Form] - [PostScript Font] page provides the following infor- mation. Item Description [Font Name] Displays the name of the font. [Source] Displays the location of the font. Configuring the Printer 8-137...
Page 405
[Form Overlay] The [Print] - [Font/Form] - [Form Overlay] page provides the following infor- mation. Item Description [File Name] Displays the name of the overlay. [Source] Displays the location of the overlay. 8-138 Configuring the Printer...
Page 406
[Color Profile] The [Print] - [Font/Form] - [Color Profile] page provides the following informa- tion. Item Description [File Name] Displays the file name of the color profile. [Profile Name] Displays the name of the color profile. [Class] Displays the type of color profile. [Color Space] Displays the color space for the color profile.
[Download Font/Form] This menu item appears only if the user has logged on to Administra- tor mode. [PostScript Font] The [Print] - [Download Font/Form] - [PostScript Font] window allows you to configure the following items: Item Description [Download Post- [Source] Specify the download destination (hard Script Font] disk) of the font.
Page 408
[Form Overlay] The [Print] - [Download Font/Form] - [Form Overlay] window allows you to configure the following items: Item Description [Download Form [Source] Specify the download destination (hard Overlay] disk) of the form overlay file. [File] Specify the file name for the form overlay to be downloaded.
Page 409
[Color Profile] The [Print] - [Download Font/Form] - [Color Profile] window allows you to con- figure the following items: Item Description [Download Color [Source] Specify the download destination (hard Profile] disk) of the color profile. [File] Specify the file name for the color profile to be downloaded.
Page 410
Item Description [Delete] button Deletes the color profile file(s) whose check boxes the left end are checked. When Download Manager is being used, long file names cannot be specified for downloaded form PostScript fonts, overlays or color pro- files. Make sure that file names comply with the 8.3 format (MS-DOS file name format).
[Report Types] The [Print] - [Report Types] - [Report Types] page allows you to configure the following items. Item Description [Configuration Page] Prints the printer configuration page. [PCL Font Page] Prints the PCL font lists. [PostScript Font Page] Prints the PostScript font lists. [Statistics Page] Prints the statistics page such as the number of pages printed.
[Direct Print] The [Print] - [Direct Print] - [Direct Print] page allows you to configure the fol- lowing items. The following file formats can be printed using direct printing: PDF, TIFF, JPEG, and XPS. Item Description [File] Specify the location of the file to be printed. Click [Browse], and then select the file.
[Storage] tab From this tab, image data saved on the machine can be managed. [Scan to HDD] [Scan to HDD] (shown above) The [Storage] - [Scan to HDD] - [Scan to HDD] page allows you to configure the following items. Some settings on this page can be changed only if the user has logged on to Administrator mode.
Page 414
[Scan to HDD] ([View]) The [Storage] - [Scan to HDD] - [Scan to HDD] - [View] page allows you to configure the following items. Item Description [Search for Number] Select the range of registration numbers to be dis- played. [Thumbnail] Displays a thumbnail of the stored file.
Page 415
[Scan to HDD] ([File Information]) Clicking a thumbnail or file name in the [Storage] - [Scan to HDD] - [Scan to HDD] - [View] page displays the [File Information] page. The [File Information] page provides the following information. Item Description [File Name] Displays the name of the file.
[PC-Fax] [PC-Fax] If a memory reception password has been specified, a page appears so that the password can be typed in. If the correct password has been typed in, the following page appears. The [Storage] - [PC-Fax] - [PC-Fax] page allows you to configure the follow- ing items.
Page 417
[PC-Fax] ([File Information]) Clicking a thumbnail or file name in the [Storage] - [PC-Fax] - [PC-Fax] page displays the [File Information] page. The [File Information] page provides the following information. Item Description [File Name] Displays the name of the file. [Time Stored] Displays the date that the file was stored.
[Address] tab From the [Address] tab, settings can be specified for destination information registered on the machine and for e-mail message subject and body text. If invalid data has been entered (too many characters or left blank) when the [Apply] button is clicked, an error message does not appear, but the entered data is cleared and the destination is not registered.
Page 419
[Address Book List] ([New Registration]) The [Address] - [Address Book] - [Address Book List] - [New Registration] page allows you to configure the following items. Item Description [New Registration] Select the type of destination to be registered. [E-mail]: Select this setting to register an e-mail des- tination.
Page 420
[Address Book List] ([New Registration]/[Edit] (E-mail)) Selecting [E-mail] in the [Address] - [Address Book] - [Address Book List] - [New Registration] page displays a page that allows you to configure the fol- lowing items. Item Description [Address Book (E-mail)] Specify the information for the destination to be registered.
Page 421
Item Description [Edit a Certifi- Select the check box to edit information cation] for the certificate. [Register a Certification]: Select this option to specify a certificate file and reg- ister a certificate. [Delete a Certification]: Select this option to delete a registered certificate. [Address Book List] ([New Registration]/[Edit] (FTP)) Selecting [FTP] in the [Address] - [Address Book] - [Address Book List] - [New Registration] page displays a page that allows you to configure the following...
Page 422
Item Description [Index] Select the index characters that will be used to search for the destination. Select the [Main] check box if it is a fre- quently used destination. [Destination Information] Specify detailed destination information. [Host Address] Type in the IP address of the destination FTP server.
Page 423
[Address Book List] ([New Registration]/[Edit] (SMB)) Selecting [SMB] in the [Address] - [Address Book] - [Address Book List] - [New Registration] page displays a page that allows you to configure the fol- lowing items. Item Description [Address Book (SMB)] Specify the information for the destination to be registered.
Page 424
Item Description [Destination Information] Specify detailed destination information. [Host Address] Type in the host name, IPv4 address or IPv6 address of the destination computer. Format: *.*.*.* (The asterisks (*) indicate numbers between 0 and 255.) Host name must be specified in upper- case.
Page 425
[Address Book List] ([New Registration]/[Edit] (WebDAV)) Selecting [WebDAV] in the [Address] - [Address Book] - [Address Book List] - [New Registration] page displays a page that allows you to configure the fol- lowing items. Item Description [Address Book (WebDAV)] Specify the information for the destination to be registered.
Page 426
Item Description [Destination Information] Specify detailed destination information. [Host Address] Type in the IP address of the destination WebDAV server. Format: *.*.*.* (The asterisks (*) indicate numbers between 0 and 255.) If the DNS server has already been con- figured, the host name can be entered instead.
Page 427
[Address Book List] ([New Registration]/[Edit] (Fax)) Selecting [Fax] in the [Address] - [Address Book] - [Address Book List] - [New Registration] page displays a page that allows you to configure the following items. Item Description [Address Book (Fax)] Specify the information for the destination to be registered.
Page 428
[Address Book List] ([New Registration]/[Edit] (I-Fax)) Selecting [I-Fax] in the [Address] - [Address Book] - [Address Book List] - [New Registration] page displays a page that allows you to configure the fol- lowing items. Item Description [Address Book (I-Fax)] Specify the information for the destination to be registered.
[Group] [Group List] The [Address] - [Group] - [Group List] page allows you to configure the follow- ing items. Item Description [New Registration] but- Click to register a new group. [Search by Number] Select a range of registration numbers to display the list of group destinations in the selected range.
Page 430
[Group List] ([New Registration]) The [Address] - [Address Book] - [Group List] - [New Registration] page allows you to configure the following items. Item Description [New Registration] Select the type of group destination to be regis- tered. [Scan]: Select this setting to register a group desti- nation where scan data is to be sent.
Page 431
[Group List] ([New Registration]/[Edit] (Scan)) Selecting [Scan] in the [Address] - [Group] - [Group List] - [New Registration] page displays a page that allows you to configure the following items. Item Description [Group (Scan)] Specify the information for the group des- tination to be registered.
Page 432
[Group List] ([New Registration]/[Edit] (Fax)) Selecting [Fax] in the [Address] - [Group] - [Group List] - [New Registration] page displays a page that allows you to configure the following items. Item Description [Group (Fax)] Specify the information for the group des- tination to be registered.
[Program] [Program List] The [Address] - [Program] - [Program List] page allows you to configure the following items. Item Description [Search by Number] Select a range of registration numbers to display the list of program destinations in the selected range. [No.] Displays the registration number.
Page 434
Item Description [Edit] button Click to register a program destination or edit an existing one. If no program destinations have been registered when this button is clicked, the [New Registration] page appears. Select the communication method for the program destination to be registered. For details, refer to “[Program List] ([New Registration])”...
Page 435
Item Description [New Registration] Select the communication method for the new pro- gram destination to be registered. Select a communication method, and then click [Next]. A page for specifying the destination infor- mation appears, corresponding to the selected communication method. For details on the items in the page for specifying the destination information, refer to the correspond- ing page listed below.
Page 436
Item Description [Program (E-mail)] Specify the information for the program destination to be registered. [No.] Specify the registration number of the destination. [Name] Type in the destination name. [Destination Information] Specify detailed destination information. The items that appear differ depending on the communication method selected in the [New Registration] page.
Page 437
[Program (Address Book)] In the [Address] - [Program] - [Program List] - [Program (Address Book)] page, specify information for the program destination after selecting [Address Book] as the communication method in the [New Registration] page. Item Description [Program (Address Book)] Specify the information for the program destination to be registered.
Page 438
Item Description [Apply] button Click to display the [Program Settings] page, and then specify detailed settings for the program destination. For details on the [Program Settings] page, refer to “[Program Settings]” on page 8-172. [Program (Group)] In the [Address] - [Program] - [Program List] - [Program] page, specify infor- mation for the program destination after selecting [Group] as the communica- tion method in the [New Registration] page.
Page 439
Item Description [Apply] button Click to display the [Program Settings] page, and then specify detailed settings for the program destination. For details on the [Program Settings] page, refer to “[Program Settings]” on page 8-172. [Program Settings] The [Address] - [Program] - [Program List] - [Program Settings] page allows you to change program destination settings.
Page 440
The page when [E-mail] was selected as the communication method for the program destination is shown. Item Description [Destination Settings] Displays detailed information for the desti- nation. [Edit] button Click to change the destination informa- tion. [Program Settings] Specify detailed settings for the program destination.
Page 441
Item Description [Subject] Specify the subject of the e-mail mes- sage. This item appears only if [E-mail] or [Group] (Scan) was selected as the communication method for the program destination. [Text] Specify the body text of the e-mail mes- sage. This item appears only if [E-mail] or [Group] (Scan) was selected as the communication method for the...
Page 442
Item Description [Monotone] Select the color setting for scanning in black and white. This item does not appear if [Fax] or [Group] (Fax) was selected as the communication method for the program destination. [Separate Select whether to divide the original docu- Scan] ment in order to scan it.
Page 443
Item Description [E-mail Notifi- Select whether an e-mail notification is to cation] be sent to the destination URL when scan data is saved. In the [Address] box, type the e-mail address of the notification recipient. This item appears only if any of the following settings were selected as the communication method for the program destination.
Page 444
Item Description [Timer TX] Select whether to perform timer transmis- sion. To perform timer transmission, spec- ify the transmission time. This item appears only if [Fax] or [Group] (Fax) was selected as the communication method for the program destination. When the program destination includes both G3 fax and Internet fax destinations, the timer transmission function cannot be...
[Subject] [Subject List] The [Address] - [Subject] - [Subject List] page allows you to configure the fol- lowing items. Item Description [No.] Displays the registration number. [E-mail Default] Select the e-mail subject to be used as the default. [Subject] Displays the name of the e-mail subject. [Edit] button Click to display the [Subject Registration] page in order to edit the registered e-mail subject.
Page 446
[Subject Registration] The [Address] - [Subject] - [Subject Registration] page allows you to configure the following items. Item Description [No.] Displays the registration number. [Subject] Register the subject of the e-mail message. Configuring the Printer 8-179...
[Text] [Text List] The [Address] - [Text] - [Text List] page allows you to configure the following items. Item Description [No.] Displays the registration number. [E-mail Default] Select the e-mail body text to be used as the default. [Subject] Displays the name of the e-mail body text. [Edit] button Click to display the [Text Registration] page in order to edit the registered e-mail body text.
Page 448
[Text Registration] The [Address] - [Text] - [Text Registration] page allows you to configure the following items. Item Description [No.] Displays the registration number. [Text] Register the body of the e-mail message. Configuring the Printer 8-181...
[Network] tab This tab allows you to configure network settings. For more information on these protocols, refer to chapter 7, "Network Printing". The [Network] tab appears only if the user has logged on to Adminis- trator mode. [General Settings] [Ethernet Settings] (shown above) The [Network] - [General Settings] - [Ethernet Settings] page allows you to configure the following items.
Page 450
Item Description [MAC Address] Displays the Media Access Control (MAC) address of the Ethernet interface. [Local Interface Settings] The [Network] - [General Settings] - [Local Interface Settings] page allows you to configure the following items. Item Description [I/O Timeout] Specify the reception timeout period. Range: 5 to 300 (seconds) Default: 15 Configuring the Printer...
[TCP/IP Settings] [TCP/IP Settings] The [Network] - [TCP/IP Settings] - [TCP/IP Settings] page allows you to con- figure the following items. For more information on these TCP/IP settings, refer to chapter 7, "Network Printing" Item Description [TCP/IP] Select whether or not to make a connection via TCP/IP.
Page 452
Item Description [SLP] Select whether or not SLP is used. Choices: [Enable], [Disable] Default: [Enable] Configuration menu equivalent: [Admin Settings] - [Ethernet] - [TCP/IP] - [SLP] [LLMNR] Select whether or not LLMNR is used. Choices: [Enable], [Disable] Default: [Enable] [IPv4 Settings] The [Network] - [TCP/IP Settings] - [IPv4 Settings] page allows you to config- ure the following items.
Page 453
Item Description [IP Address Setting Select the automatic assigning method for the Method] machine IP address. Choices: [DHCP], [BootP], [ARP/PING] The [Auto IP] check box is selected and cannot be cleared. Default: [DHCP] Configuration menu equivalent: [Admin Settings] - [Ethernet] - [TCP/IP] - [DHCP] / [BOOTP] / [ARP/Ping] [IP Address]* Specify the machine's IP address.
Page 454
Item Description [Default Gateway] * If a router is used on the network, specify the router's address. Format: *.*.*.* (The asterisks (*) indicate numbers between 0 and 255.) Default: [0.0.0.0] If the specified router address is outside of the allowable range, the value is not changed, even after [Apply] is clicked.
Page 455
[IPv6 Settings] The [Network] - [TCP/IP Settings] - [IPv6 Settings] page allows you to config- ure the following items. For more information on these TCP/IP settings, refer to chapter 7, "Network Printing" Item Description [IPv6] Select whether or not IPv6 is used. Choices: [Enable], [Disable] Default: [Enable] Configuration menu equivalent:...
Page 456
Item Description [IPv6 Global Address] Specify the IPv6 global address. Range: Up to 43 characters Default: [::/0] Configuration menu equivalent: [Admin Settings] - [Ethernet] - [TCP/IP] - [IPv6] - [Global Address] When [Ipv6 Auto Setting] is set to [Enable], this item is not applied, even if the setting is changed.
Page 457
Item Description [NTP Server Auto- Select whether or not the NTP server address is matic Acquisition] automatically acquired from the DHCPv6 server to overwrite the current setting. Choices: [Enable], [Disable] Default: [Enable] [RAW Port Settings] The [Network] - [TCP/IP Settings] - [RAW Port Settings] page allows you to configure the following items.
Page 458
Item Description [RAW Port Number] Specify the number of the printer's RAW port. Choices: 1 - 65535 Default: [9100] The currently used port number and numbers 80, 161, 427, 443, 515, 631 and 4567 cannot be specified. [RAW Port Bidirec- Select whether or not RAW port bidirectional is tional] used.
Page 459
Item Description [Host Name] Specify the host name. Range: Up to 63 characters Default: [BHC35-xxxxxx] "xxxxxx" indicates the last six digits of the MAC address in hexadecimal values. [Domain Name] Specify the domain name. Range: Up to 63 characters Default: [Blank] [DNS Server Address Specify the IPv4 DNS server address.
[E-mail Settings] [E-mail TX (SMTP)] The [Network] - [E-mail Settings] - [E-mail TX (SMTP)] page allows you to configure the following items: Item Description [Email TX [E-mail TX If [Enable] is selected, e-mail messages (SMTP)] (SMTP)] can be sent. Choices: [Enable], [Disable] Default: [Enable] Configuration menu equivalent: [Admin Settings] - [Ethernet] -...
Page 461
Item Description [E-mail If [Enable] is selected, e-mail notification Notifica- is enabled. tion] Choices: [Enable], [Disable] Default: [Enable] [Total If [Enable] is selected, total counter notifi- Counter cation is enabled. Notifica- Choices: [Enable], [Disable] tion] Default: [Enable] [SMTP Server Specify the SMTP server address. Address]* An Ipv4 address, Ipv6 address or FQDN (fully qualified domain name) can be...
Page 462
Item Description [Connection Time- Select the length of time until the connec- out] tion with the SMTP server times out. Choices: [30 sec.], [60 sec.], [90 sec.], [120 sec.], [150 sec.], [180 sec.], [210 sec.], [240 sec.], [270 sec.], [300 sec.] Default: [60 sec.] [Administrator Displays the e-mail address of the admin-...
Page 463
Item Description [POP Before [POP Before If [Enable] is selected, POP before SMTP SMTP] SMTP] is enabled. Choices: [Enable], [Disable] Default: [Disable] [POP Before Specify the length of time after logging on SMTP Time] to the POP server that the SMTP server is accessed.
Page 464
[E-mail RX (POP)] The [Network] - [E-mail Settings] - [E-mail RX (POP)] page allows you to con- figure the following items. Item Description [E-mail RX (POP)] If [Enable] is selected, e-mail messages can be received. Choices: [Enable], [Disable] Default: [Enable] [POP Server Address] Specify the POP server address.
Page 465
Item Description [SSL/TLS] Select whether or not SSL/TLS is used. Choices: [Enable], [Disable] Default: [Disable] [Port Number Specify the SSL port number. (SSL)] Range: 1 to 65535 Default: 995 [Login Name] Type in the login name for the POP server. Range: Up to 63 characters Default: [Blank] [Password]...
Page 466
Item Description [Auto Check of Arrival] Select whether or not automatic reception is performed. Choices: [Enable], [Disable] Default: [Disable] [S/MIME] The [Network] - [E-mail Settings] - [S/MIME] page allows you to configure the following items. Item Description [S/MIME] Select whether or not to use S/MIME. Choices: [Enable], [Disable] Default: [Enable] [Digital Signature]...
[E-mail Text Encryp- Select the e-mail text encryption format. tion Method] Choices: [RC2-40], [RC2-64], [RC2-128], [DES], [3DES], [AES-128], [AES-192], [AES-256] Default: [3DES] [Digital Signature Type] Select the type of digital signature applied. Choices: [SHA-1], [SHA-256] Default: [SHA-1] [LDAP Settings] [LDAP Settings] The [Network] - [LDAP Settings] - [LDAP Settings] page allows you to config- ure the following items.
Page 468
[LDAP Server Registration] The [Network] - [LDAP Settings] - [LDAP Server Registration] page allows you to configure the following items. Item Description [LDAP [Server Address] * Specify the address of the LDAP server. Server Reg- An IPv4 address, IPv6 address or FQDN istration] (fully qualified domain name) can be specified.
Page 469
Item Description [SSL/TLS] Select whether or not SSL/TLS is used. Choices: [Enable], [Disable] Default: [Disable] [Port Specify the SSL port number. Number Range: 1 to 65535 (SSL)] Default: [636] [Search Base] Specify the starting point for searching directories in the LDAP server. Range: Up to 255 characters Default: [Blank] [Timeout]...
Page 470
Item Description [Authentication Select the authentication method used for Method] logging on to the LDAP server. If [anonymous] is selected, a user name and password are not neces- sary. If [Simple] is selected, a user name and password are necessary. If [Digest-MD5] is selected, use a gen- eral LDAP server.
Page 471
Item Description [User Referral] Select whether to use the referral func- tion. Select the appropriate setting for the LDAP server environment. Choices: [On], [Off] Default: [On] [Search Condition Select the name attribute used for LDAP Attributes] searches. Choices: [Name], [Nickname] Default: [Name] [Initial Setting for Search Details] Select the LDAP search conditions.
[HTTP Settings] [HTTP Server Settings] The [Network] - [HTTP Settings] - [HTTP Server Settings] page allows you to configure the following items. Item Description [HTTP Server] Select whether or not the HTTP server is used. Choices: [Enable], [Disable] Default: [Enable] [Port Number] Specify the port number of the HTTP server.
Item Description [SSL/TLS] Select whether or not SSL/TLS is used. Choices: [Enable], [Disable] Default: [Disable] [Port Number (SSL)] Specify the SSL port number. Range: 1 to 65535 Default: [443] [IPP Settings] [IPP Settings] 8-206 Configuring the Printer...
Page 474
Select whether or not to accept IPP jobs. Choices: [Enable], [Disable] Default: [Enable] [Printer Name] Specify the printer's name. Range: Up to 127 characters Default: KONICA MINOLTA bizhub C35(xx:xx:xx) [Printer Location] Specify the printer's location. Range: Up to 127 characters Default: [Blank] [Printer Information] Specify the printer information.
Page 475
Item Description [Printer URI] Displays the printer's Uniform Resource Identifier (URI). http://<IP_address>/ipp http://<FQDN>/ipp ipp://<IP_address>/ipp ipp://<FQDN>/ipp https://<IP_address>/ipp https://<FQDN>/ipp "https://<IP_address>/ipp" and "https://<FQDN>/ipp" appear only if SSL/TLS is enabled. [Operational [Print Job] If this check box is selected, the Print Job Support] command is enabled. Default: Checked [Validate Job] If this check box is selected, the Validate...
Page 476
Item Description [IPP Authentication] Select the authentication method for IPP connections. Choices: [Disable], [Request- ing-user-name], [Basic], [Digest] Default: [Requesting-user-name] [User Name] Specify the user name used with Basic or Digest authentication. Range: Up to 20 characters Default: [user] [Password] Select [Change Password] to change the password.
[FTP Settings] [FTP Server Settings] The [Network] - [FTP Settings] - [FTP Server Settings] page allows you to configure the following items. Item Description [FTP Server] Select whether or not the FTP server is used. Choices: [Enable], [Disable] Default: [Enable] Configuration menu equivalent: [Admin Settings] - [Ethernet] - [TCP/IP] - [FTP]...
Page 478
[FTP TX Settings] The [Network] - [FTP Settings] - [FTP TX Settings] page allows you to config- ure the following items. Item Description [FTP TX] If [Enable] is selected, FTP transmission is enabled. Choices: [Enable], [Disable] Default: [Enable] [Connection Timeout] Select the length of time (in seconds) until the con- nection with the FTP server times out.
[Proxy Server Port Specify the port number for the proxy server. Number] Range: 1 to 65535 Default: [21] [SNMP Settings] [SNMP Settings] 8-212 Configuring the Printer...
Page 480
The [Network] - [SNMP Settings] - [SNMP Settings] page allows you to con- figure the following items. Item Description [SNMP Set- [SNMP] If [Enable] is selected, SNMP is enabled. tings] Choices: [Enable], [Disable] Default: [Enable] Configuration menu equivalent: [Admin Settings] - [Ethernet] - [TCP/IP] - [SNMP] [SNMP v1/v2c(IP)] If [Enable] is selected, SNMPv1/v2c (IP) is enabled.
Page 481
Item Description [SNMP v1/ [Read Community Specify the community name to be used v2c Settings] Name] for scanning. Range: Up to 15 characters Default: [public] [Write] If [Enable] is selected, the Write function is enabled. Choices: [Enable], [Disable] Default: [Enable] [Write Community Specify the community name to be used Name]...
Page 482
Item Description [SNMP v3 [Context Name] Specify the context name. Settings] Range: Up to 63 characters Default: [Blank] [Discovery] If [Enable] is selected, the Discovery func- tion is enabled. Choices: [Enable], [Disable] Default: [Enable] [Discovery User Specify the user name for detection. Name] Range: Up to 32 characters Default: [public]...
Page 483
Item Description [priv-pas Select [Change Password] to change the sword] password. Specify the read-only user password to be used for privacy (encryption). Range: 8 to 32 characters Default: [PrivPassword] [Write User Name] Specify the reading/writing user name. Range: Up to 32 characters Default: [restrict] The same name cannot be set for [Discovery User Name] and [Write...
Item Description [Encryption Algo- Select an encryption algorithm. rithm] Choices: [DES], [AES-128] Default: [DES] [Authentication Select an authentication method. Method] Choices: [MD-5], [SHA-1] Default: [MD-5] [Trap Set- [Allow Setting] Select whether or not to permit the Trap tings] settings Choices: [Enable], [Disable] Default: [Enable] [Trap Setting Select whether or not to enable the Trap...
Page 485
The [Network] - [SMB Settings] - [WINS Settings] page allows you to config- ure the following items. Item Description [WINS] If [Enable] is selected, the WINS server function is enabled. Choices: [Enable], [Disable] Default: [Enable] [WINS Automatic To automatically obtain the WINS server address, Retrieval] select [Enable].
Page 486
[SMB Client Settings] The [Network] - [SMB Settings] - [SMB Client Settings] page allows you to configure the following items. Item Description [SMB Client] If [Enable] is selected, the SMB client function is enabled. Choices: [Enable], [Disable] Default: [Enable] [NTLM] Select the NTLM version.
Page 487
[Direct Hosting Settings] The [Network] - [SMB Settings] - [Direct Hosting Settings] page allows you to configure the following items. Item Description [Direct Hosting] To use IPv6 addresses for communication, select [Enable]. Choices: [Enable], [Disable] Default: [Enable] 8-220 Configuring the Printer...
[Web Service Common Specify common Web Service settings. Settings] [Friendly Name] Type in a friendly name. Range: Up to 62 characters Default: [KONICA MINOLTA bizhub C35(XX:XX:XX)] [Secure Mode] If [Enable] is selected, SSL is enabled. Choices: [Enable], [Disable] Default: [Disable]...
Page 489
Choices: [Enable], [Disable] Default: [Enable] [Printer Name] Type in a printer name. Range: Up to 63 characters (excluding ! \ and ,) Default: [KONICA MINOLTA bizhub C35(XX:XX:XX)] [Printer Loca- Specify the printer location. tion] Range: Up to 63 characters...
Page 490
Item Description [Printer Informa- Specify the printer information. tion] Range: Up to 63 characters Default: [Blank] [Scanner Settings] The [Network] - [Web Service Settings] - [Web Service Scanner Settings] page allows you to configure the following items. Item Description [Web Service Scanner Specify settings for scanning using Web Service.
Page 491
Item Description [Scanner Name] Type in a scanner name. Range: Up to 63 characters (excluding ! \ and ,) Default: [KONICA MINOLTA bizhub C35(XX:XX:XX)] [Scanner Loca- Specify the scanner location. tion] Range: Up to 63 characters Default: [-] [Scanner Infor- Specify the scanner information.
[Admin Settings] - [Ethernet] - [TCP/IP] - [Bonjour] [Printer Name] Type in a printer name. Range: Up to 63 characters Default: [KONICA MINOLTA bizhub C35(XX:XX:XX)] [Priority Protocol] Select the connection protocol given priority with Bonjour. Choices: [LPD], [RAW Port], [IPP]...
[NetWare Settings] [NetWare Settings] The [Network] - [NetWare Settings] - [NetWare Settings] page allows you to configure the following items. Item Description [NetWare Set- [IPX/SPX] If [Enable] is selected, the IPX/SPX func- tings] tion is enabled. Choices: [Enable], [Disable] Default: [Disable] [Ethernet Select the frame type.
Page 494
Item Description [PServer Set- [Print Server Specify the print server name for the tings] Name] printer. Range: Up to 63 characters Default: [BHC35-xxxxxx] "xxxxxx" indicates the last six digits of the MAC address in hexadecimal values. [Print Server Select [Change Password] to change the Password] password.
Page 495
Item Description [NPrinter/ [Printer Name] Specify the printer name. RPrinter Set- Range: Up to 63 characters tings] Default: [BHC35-xxxxxx] "xxxxxx" indicates the last six digits of the MAC address in hexadecimal values. [Printer Num- Specify the printer number. ber] Range: 0 to 255 Default: [255] [NetWare Status] The [Network] - [NetWare Settings] - [NetWare Status] page provides the fol-...
[AppleTalk Settings] [AppleTalk Settings] The [Network] - [AppleTalk Settings] - [AppleTalk Settings] page allows you to configure the following items. Item Description [AppleTalk] If [Enable] is selected, AppleTalk is enabled. Choices: [Enable], [Disable] Default: [Enable] Configuration menu equivalent: [Admin Settings] - [Ethernet] - [AppleTalk] [Printer Name] Specify the printer name.
Item Description [Current Zone Name] Displays the current zone name. [Network Fax Settings] [Network Fax Function Settings] The [Network] - [Network Fax Settings] - [Network Fax Function Settings] page allows you to configure the following items. Item Description [I-Fax] Select whether or not the I-Fax is used. Choices: [Enable], [Disable] Default: [Enable] 8-230...
[WebDAV Settings] [WebDAV Client Settings] The [Network] - [WebDAV Settings] - [WebDAV Client Settings] page allows you to configure the following items. Item Description [WebDAV Client] Select whether or not the WebDAV client is used. [Proxy Server Address] To perform transmissions via a proxy server, enter its address.
Item Description [Proxy Server Pass- Select [Change Password] to change the password. word] Type in the password for logging on to the proxy server. Range: Up to 63 characters Default: [Blank] [Connection Timeout] Specify the length of time until communication with a server times out.
Page 500
Item Description [OpenAPI] Select whether or not OpenAPI is used. Choices: [Enable], [Disable] Default: [Enable] [Port Number] Specify the port number. Range: 1 to 65535 Default: [50001] The currently used port number cannot be specified. [SSL/TLS] Select whether or not SSL/TLS is used. Choices: [Non-SSL Only], [SSL Only], [SSL/Non-SSL] Default: [Non-SSL Only]...
[TCP Socket Settings] [TCP Socket Settings] The [Network] - [TCP Socket Settings] - [TCP Socket Settings] page allows you to configure the following items. Item Description [TCP Socket] Select whether or not the TCP socket is used. Choices: [Enable], [Disable] Default: [Enable] [Port Number] Specify the port number.
Item Description [Port Number (SSL/ Specify the SSL port number. TLS)] Range: 1 to 65535 Default: [59159] The currently used port number cannot be specified. [LLTD Settings] [LLTD Settings] The [Network] - [LLTD Settings] - [LLTD Settings] page allows you to config- ure the following items.
Page 508
Print quality settings, SNMP ........7-10 PageScope Web PS font, PageScope Web Connection ......8-132 Connection ......8-140 Print, PageScope Web PS settings, PageScope Web Connection ......8-110 Connection ......8-124 Color profile ......8-142 Public User Mode, PageScope Direct Print ......8-145 Web Connection ....8-9 Form overlay ......8-141 General settings ......8-110 Paper source settings .....8-114...
Page 509
System requirements Linux ...........2-2 Web page, printer ......8-4 Mac OS X ......1-2, 1-110 Browser ........8-4 System, PageScope Web Printer name ....... 8-4 Connection ......8-13 Web Service Print ...... 7-10 Clear settings ......8-36 WebDAV ........8-231 Counter ........8-22 WSD .......... 8-221 Date/Time .........8-29 Printing via .......