To Set A Non-Standard (Custom) Paper Size - Konica Minolta DI2510 Advanced Information

9

To set a non-standard (custom) paper size

If non-standard-sized paper is loaded, it will be necessary to enter the
paper size.
Two non-standard paper sizes can be stored for easy selection. For
details, refer to the next section.
Note
Where you do not wish to set the custom size, press the [Panel Reset]
key, or exceed the auto panel reset time, and this will reset to the
default settings.
1
Touch [Paper].
2
Touch the button for the multiple
bypass tray, and then touch [Mode
Change].
3
Touch [Custom Size].
The Custom Size screen appears.
4
Touch [X] and press the [C] key.
Then, using the 10-Key Pad, type in
the length of side X for the
document.
9-14
Copy Paper
Di2510/Di3010/Di3510