Power Management Software - Powerware Prestige 6000 Installation And Operator's Manual

Power Management Software

Power management software allows you to monitor UPS operations
automatically. To use OnliNet or LanSafe software, the UPS must be
configured for any one of the Data Dump, Terminal, or Printer modes;
however, Printer mode is preferred.
OnliNet provides multiple levels of UPS monitoring and control, as well
as automatic shutdown for many different operating systems. If you
have any questions or would like further information, see Chapter 8,
"Service and Support" on page 75 for the number to call in your
location.
Powerware ® Prestige Series Installation and Operator's Manual for IBM Applications (6000 VA) Uncontrolled Copy
Z > Set Baud Rate
Baud Rate Menu displays a list of baud rate options.
5. To save the configuration settings, type
prompt. The UPS operates and communicates under the new
configuration, and defaults to these settings each time it is
started.
If you want to abandon the selections you have made, type
quit.
NOTE Any changes you make to the UPS communications configuration must
correspond to the communications equipment you are using. In particular, new baud
rate selections for the UPS must match your communications equipment.
allows you to select a new baud rate. The Select
T@G@8U 76V9 S6U@
! 3 "
# 3 !
$ 3 !#
% 3 #'
& 3 (%
' 3 (!
R 3 RVDU UCDT H@IV
@IU@S T@G@8UDPI 33
Communication
at the Main Menu
S
Q
to
61