Setting The Authentication Method - Konica Minolta bizhub C3110 User Manual

2.3

Setting the Authentication Method

2.3 Setting the Authentication Method
When access to the machine by the Administrator of the machine through the Administrator Settings is au-
thenticated, the machine enables setting of the user authentication.
If [Device] is selected, the authentication function of this machine can be used.
If [Device] is selected, the IC card function can be set. The IC card function uses an IC card reader connected
to the machine and reads the IC card with the IC card reader to perform user authentication.
NOTICE
If Enhanced Security Mode is set to [ON], Authentication Method should be set to [Device] and Authentication
Device Settings should be set to [Card Authentication + Password].
Setting the Authentication Method
0 For the procedure to access the Administrator Mode, see page 2-2.
0 Do not leave the machine with the Administrator Mode setting screen left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Administrator Mode.
1
Start PageScope Web Connection and access the Administrator Mode.
2
Click the [Security] tab.
3
Select [Device] from the User Authentication pull-down menu, and click [Apply].
4
Click [General Settings] from the [Authentication Device Settings] menu and select [Card Authentication
+ Password].
Authentication Method
Card Authentication
Card Authentication
+ Password
5
Click [Apply].
bizhub C3110
Description
Uses an IC card for authentication.
Uses an IC card placed on the IC card reader and entry of a user
password for authentication.
If Enhanced Security Mode is set to [ON], configure this setting.
2
2-8