User Authentication Function - Konica Minolta bizhub C3110 User Manual

3.1

User Authentication Function

3 User Operations
3.1 User Authentication Function
When [Device] is set for Authentication Method of the Administrator Settings, the User Authentication func-
tion implements authentication of the user of this machine before he or she actually uses it through the User
Password that consists of 8 to 64 digits. During the authentication procedure, the User Password entered for
the authentication purpose appears as "●" on the display. A failure in authentication as a result of the entry
of a wrong password is counted as unauthorized access.
The entry of a wrong password is counted as unauthorized access, even if it is not likely that the assets to be
protected will be affected during user authentication operations via application software. For detailed oper-
ating procedures, see the corresponding user's guide.
NOTICE
Before operating the machine, the user him/herself should change the User Password from that registered
by the Administrator of the machine. For details of changing the User Password, see page 3-9. For more de-
tails of User Name and User Password, ask the Administrator of the machine.
If the User Password is changed by the Administrator of the machine during operation of this machine, the
user him/herself should immediately change the User Password.
Make absolutely sure that your User Password is not known by any other users.
If the IC card function has been set by the Administrator of the machine, authentication using the IC card can
be performed.
Authentication Method
Card Authentication
Card Authentication + Password
Reference
- If authentication is to be performed by using the IC card, the Administrator of the machine should set
the IC card function and information recorded on the IC card be registered in the machine in advance.
For more details, contact the Administrator of the machine.
- Authentication using the IC card is enabled only when [Device] is selected.
- Authentication using the IC card is disabled, if it is performed from a device other than this machine,
such as printing from PageScope Web Connection or printer driver.
bizhub C3110
Description
Uses an IC card for authentication.
Uses an IC card placed on the IC card reader and entry of a user
password for authentication.
If Enhanced Security Mode is set to [ON], configure this setting.
3
3-2