Setting The Ic Card Information - Konica Minolta bizhub C3110 User Manual

4.1 PageScope Data Administrator
4.1.3

Setting the IC card information

0 The IC card driver (USB driver) of the IC card reader and the IC card plug-in must be installed in the PC
of the Administrator of the machine in advance. For details, refer to the User's Guide furnished with the
machine.
0 For the procedure to access the machine, see steps 1 through 5 of page 4-2.
0 Do not leave the site while you are gaining access to the machine through PageScope Data Adminis-
trator. If it is absolutely necessary to leave the site, be sure first to log off from the PageScope Data
Administrator.
1
Access the machine through [Authentication Settings/Address Settings] mode of PageScope Data Ad-
ministrator.
2
Click the Authentication settings expand button.
3
Select [User authentication settings] and click [Add].
% To set a registered user, after selecting the user click [Edit] and go to step 6.
4
Click [OK].
5
Enter the user name and password, and select the [IC card authentication] tab.
bizhub C3110
4
4-5