Setting The Restore All - Konica Minolta bizhub C3110 User Manual

2.9 Erasing data when the machine is to be discarded or use of a leased machine is terminated
2.9.2

Setting the RESTORE ALL

The memory area on the MFP board is initialized and reset to the default state.
NOTICE
Perform "RESTORE ALL" from the control panel of the machine, and not via the network.
0 For the procedure to call the Security Settings on the display, see steps 1 through 2of page 2-7.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
0 For details of items that are cleared, see page 1-11.
1
Call the Security Settings on the display from the control panel.
2
Press the + or , key to select [Security Details], then press the Select key.
3
Press the + or , key to select [Initialize], then press the Select key.
4
Press the + or , key to select [RESOTRE ALL], then press the Select key.
5
Press the + or , key to select [ON], then press the Select key.
The machine restarts automatically.
% Do not turn off the power switch of the machine during execution of RESTORE ALL. If the power
switch is inadvertently turned off during the execution of RESTORE ALL and the machine, as a re-
sult, develops a fault, contact your Service Representative.
bizhub C3110
2
2-20