Snmp Setting Function; Changing The Auth-Password And Priv-Password; From The Control Panel - Konica Minolta bizhub 361 Security Manual

Administrator Operations
2.17

SNMP Setting Function

When access to the Administrator of the machine by the Administrator Settings is authenticated, the machine
enables changing of the SNMP v3 Write User Password (auth-password, priv-password) required for
accessing the MIB object over the network using the SNMP from the PC. In PageScope Web Connection,
import/export of the Device Setting is enabled, allowing the setting for Security Level of SNMP v3 Setting to
be saved or the saved backup data to be restored.
Each of the auth-password and priv-password can consist of 8 to 32 digits. The password entered for the
authentication purpose appears as "*" or "●" on the display.
2.17.1

Changing the auth-password and priv-password

Note
Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
<From the Control Panel>
0 For the procedure to call the Administrator Settings to the display, see
Settings" on page
1
Call the Administrator Settings to the screen from the control panel.
2
Touch [Network Settings].
3
Touch [SNMP Settings].
501/421/361
2-2.
"Accessing the Administrator
2
2-96