Changing The Administrator Password - Konica Minolta bizhub C3110 User Manual

2.7

Changing the Administrator Password

2.7 Changing the Administrator Password
When access to the machine by the Administrator of the machine through the Administrator Settings from
the control panel is authenticated, the machine enables the operation of changing the Administrator Pass-
word required for accessing the Administrator Settings.
The Administrator Password entered for the authentication purpose appears as "*" on the display.
Changing the Administrator Password
0 For the procedure to call the Security Settings screen on the display, see steps 1 through 2 of page 2-7.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
1
Call the Security Settings screen on the display from the control panel.
2
Press the + or , key to select [Admin. Password], then press the Select key.
3
Enter the new 8-digit Administrator Password from the keypad, and press the Select key.
% If the entered Administrator Password does not meet the Password Rules, a message that tells that
the entered Administrator Password cannot be used appears. Enter the correct Administrator Pass-
word. For details of the Password Rules, see page page 1-9.
% Press the
% Press the Back key to delete the entered characters one by one.
% Hold down the Back key to clear all the entered characters.
4
To prevent entry of a wrong Administrator Password, enter the new 8-digit Administrator Password
once again, and press the Select key.
% If the entered Administrator Password does not match, a message that tells that the Administrator
Password does not match appears. Enter the correct Administrator Password.
% Press the
% Press the Back key to delete the entered characters one by one.
% Hold down the Back key to clear all the entered characters.
bizhub C3110
key to switch the input mode between alphabet and numeric.
key to switch the input mode between alphabet and numeric.
2
2-14