Generator Installation - KYMCO Venox 250 Service Manual

8. GENERATOR/LEFT CRANK CASE COVER
Install the flywheel puller.
Remove the flywheel using a flywheel puller.

GENERATOR INSTALLATION

Install the generator flywheel. Hold the
flywheel with a flywheel holder and tighten
the flywheel lock bolt.
＊
Install the flywheel by aligning the
groove in the flywheel with the key on
the crankshaft.
When installing, be careful not to
damage the crankshaft.
Torque: 7.5阡8.5kg-m
Special
Flywheel Holder
Flywheel Puller
LEFT CRANKCASE COVER
INSTALLATION
Install the left crankcase cover and tighten
the seven bolts.
Torque: 0.8阡1.2kg-m
Flywheel Puller
Flywheel
Groove
VENOX250/250i
Key
8-4