Crankcase Removal - KYMCO Venox 250 Service Manual

10
.TRANSMISSION SYSTEM
Remove the stopper and spring attaching
bolts.
Remove the gear shift cam bolt.
Remove the gear shift cam and set pin.
GEAR/SHAFT COLLAR INSPECTION
Check the drum stopper and spring for
damage, or change shape.
Check the gear shift plate and gear splindle
shift, gear shift cam, washer for wear,
damage, or change shape.
Check the change cover bearing for damage,
slack or change shape.
INSTALLATION
The installation sequence is the reverse of
removal.

CRANKCASE REMOVAL

The following parts must be removed
before removing the crankcase:
Cylinder head/ camshaft.
Starter motor/generator/left and right
crankcase cover/one-way clutch.
Clutch/gear shift mechanism.
Remove the six upper crankcase attaching
bolts.
10-5
Gear Shift Cam
Stopper
Ball Bearing Holder
Washer
Gear Shift Plate
Gear Shift Cam
Bolts
VENOX250/250i
Spring
Drum Stopper Spring
Gear Shift Splindle