9
. CLUTCH/GEAR SHIFT MECHANISM
INSTALLATION
Install the one-way clutch and starter
reduction gear in the reverse order of
removal.
Align the flange of the one-way clutch with
the crank mark.
CLUTCH REMOVAL
Remove the four clutch lifter bolts.
Remove the clutch lifter and four tension
springs.
Torque: 0.8阡1.2kg-m
Remove the one-way clutch mounting bolt
and the clutch.
Torque: 5.5阡6.5kg-m
Special
Clutch lifter holder
Lock nut socket wrench
Remove the washer.
*
Install the washer with the mark facing
up.
Clutch Lifter
Clutch Lifter Holder
Lock Nut Socket Wrench
VENOX250/250i
Tension Springs
Clutch
9-6