Open Communication To The X-Gateway - HMS Anybus X-Gateway Series User Manual

Anybus Configuration Manager 17

3.2 Open Communication to the X-gateway

1. Connect a USB cable between the USB port
on the X-Gateway and a USB port on the PC.
2. Start Anybus Configuration Manager. The
window will look much like the example here.
3. Go to the menu Online>>Select Connec-
tion.
4. In the list of connections that appears, select
the one to use. If the connection requires con-
figuration, click the Config button.
5. Click Connect to open the connection.
Anybus X-gateway User Manaul Doc: HMSI-27-262, Rev: 2.10