Table of Contents
Advertisement
3. Anybus Configuration Manager
3.1 General Information
In general, the X-gateway requires very little effort to get it up and running. However, since all networks
are different, certain settings may need adjustment to suit a particular application.
This can be achieved by using the Anybus Configuration Manager (ACM), which accesses the gateway
settings via the USB connector. ACM is Windows-based software available free of charge from
www.anybus.com
Note: This document only covers the common procedures applicable to all gateway configurations
(with some minor exceptions). Where applicable, network-specific settings are described separately in
the online help available from ACM.
See also: "Gateway Config Interface (USB)" on page 19.
Anybus X-gateway User Manaul
Chapter 3
Doc: HMSI-27-262, Rev: 2.10
Advertisement
Table of Contents
Need help?
Do you have a question about the Anybus X-Gateway Series and is the answer not in the manual?