Cutting Roll Media - Xerox 6204 User Manual

Product Overview

Cutting Roll Media

The following describes how to cut the lead edge of the roll media loaded in drawer 1 or 2.
1. Open the front doors.
2. Pull out the drawer for Roll 1 or Roll 2.
WARNING:
do so.
3. Press the cutter button to cut the lead edge of the media.
The lead edge of the media is cut.
Note
Pressing the cutter button one time cuts about 8.3 inches (210 mm) of media from the lead edge
of the roll. When the cutter button is held down, the roll media feeds continuously until the cutter
button is released. The roll media is cut when the cutter button is released.
2-46 Xerox 6204 Wide Format Solution
Printer User Guide
Downloaded From ManualsPrinter.com Manuals
Do not open the Roll 1 or the Roll 2 cutter cover unless you are specifically directed to