Error Messages - Xerox 6204 User Manual

Problem Solving

Error Messages

This section describes how to solve the problem when an error message appears.
Error messages displayed will vary depending on your particular situation and the error involved.
Error Message
A fault has occurred.
Switch Off the Machine and then On.
(XXX-XXX)
A fault has occurred.
Press [Restart] to start recovery. (XXX-
XXX)
7-8 Xerox 6204 Wide Format Solution
User Guide
Downloaded From ManualsPrinter.com Manuals
Cause and Remedy
[Cause] An error occurred.
[Remedy]Turn off the power, wait until the touch screen goes dark
(about 10 sec.), and then turn on power again.
If the message persists, record the displayed contents for [(XXX-
XXX)]. Switch off the machine immediately, wait for the touch
screen to go dark, and contact your Xerox Customer Support Center.
[Cause] An internal error occurred.
[Remedy] Select the [Restart] button on the display.
If the error persists, turn off the power (about 10 sec.), then turn on
the power again.
If the message persists, record the displayed contents for [(XXX-
XXX)]. Switch off the machine immediately, wait for the touch
screen to go dark, and contact your Xerox Customer Support Center.