System Power Off Procedure - Xerox 6204 User Manual

Product Overview
3. Press the power button on the front of the controller.
3 Power Button
The power button lamp will illuminate. After about one-half minute, the control panel will display
the message Printer Warming Up. The machine will be print-ready in about three minutes.

System Power Off Procedure

CAUTION:
The system shutdown procedure below allows the controller to power down correctly. Shutdown is
best performed through the Web Print Management Tool or the System Administration menu's
[Shutdown] feature. Only authorized persons should power down the system fully.
The procedure for powering down the entire system is described below. Follow this procedure to
prevent data corruption and the possibility of a service call when a full system shutdown is called for.
1. Make sure that all print jobs have finished processing and that the <Transmitting> indicator is not
illuminated.
2. Select [Shutdown] from either the control panel or from the Web Print Management Tool.
Shutdown from the control panel:
1. Press the <Log In/Out> button on the control panel, enter the System Administration password
when the [Password] screen displays, and then select the [Shutdown] button on the [System
Administration] menu. The [Shutdown] screen will display.
2-34 Xerox 6204 Wide Format Solution
Printer User Guide
Downloaded From ManualsPrinter.com Manuals
Powering down the system incorrectly may result in data corruption and a service call.