Exiting The System Administration Mode - Xerox 6204 User Manual

Notes
•
•
•
2. Create a system password following the procedure in the section on Change Password.

Exiting the System Administration Mode

1. Select [Close] on the [System Administration] menu.
The system will exit System Administration mode and the default screen will display.
Note
The default screen may be changed from the [Menu] screen by selecting [Setup] > [Control Panel]
> [Default Screen], and selecting one of the available options.
Downloaded From ManualsPrinter.com Manuals
The factory default system password is "0" (zero). At this setting, the touch screen will
display the [System Administration] menu when anyone selects the <Log In/Out>
button.
To prevent unauthorized access to the System Administration features, a system
password should be entered as soon as possible after installation. Refer to the section on
Change Password.
After the system password is set up, a login screen will display when the <Log In/Out>
button is selected, restricting access to the authorized individual(s).
System Administration
Xerox 6204 User Guide
Printer User Guide
4-3