Xerox 6204 User Manual page 30

Product Overview
Right and Rear Views*
12
11
10
Copier/Printer shown. Printer components are identical.
*
No. Component
8 Toner supply port
9 Circuit Breaker
10 Power Switch
11 Upper unit release
lever
12 Upper unit
13 Manual feed tray
(Bypass)
14 Fuser cover
15 Media heater
switch
16 Cutter button
17 Cutter cover
18 Roll 1
19 Roll 2 location
2-24 Xerox 6204 Wide Format Solution
Printer User Guide
Downloaded From ManualsPrinter.com Manuals
8
13
9
19
Function
Toner is added through this port.
Switches the input power to the machine on/off and provides overcurrent
and short circuit protection.
Switches the machine power on/off. (Also called the Standby switch.)
Lift up this lever to open the upper unit.
Open this to clear a paper jam.
Open and load media here when making manual feed copies or prints.
Open this to clear a paper jam.
Switches the media heater on/off.
Powering on the media heater helps prevent the media from wrinkling. The
media heater switch is normally on.
Cuts the lead edge of roll media.
Covers the cutter to cut media. Normally, do not open this cover.
Load roll media here.
A second, optional roll (Roll 2) may be installed below Roll 1.
(controller not shown)
14
18
17
16
15