5.
Pinch the lever at the end of the shaft, and insert the shaft into the new roll media. Be sure the roll
ends align with the media size guide.
6.
Adjust the roll media's orientation, and place the shaft on the shaft guide.
7.
Rotate the roll media until the lead edge is gripped in the roller.
The roll media will automatically load, and then stop.
Note
If the roll media cannot be loaded correctly because its lead edge is damaged, trim the lead edge
before setting it in place.
WARNING:
do so.
Downloaded From ManualsPrinter.com Manuals
Do not open the Roll 1 or the Roll 2 cutter cover unless you are specifically directed to
Product Overview
Xerox 6204 Wide Format Solution
Printer User Guide
2-43