Setting The Clock Format - Roberts R100 Manual

The clock display used in Standby mode and on the playing mode screens
can be set to 12 or 24 hour format. The selected format is then also used
when setting the alarms.
1. With your radio switched on, press the Menu button to access the
menu for the current mode.
2. Press the Tuning Up or Down buttons until 'System settings' is
highlighted on the display. Press the Select button to enter the System
Settings menu.
3. Press the Tuning Up or Down buttons until 'Time/Date' is highlighted
on the display. Press the Select button to enter the time setup.
4. Press the Tuning Up or Down buttons until 'Set format' is highlighted
on the display. Press the Select button to enter the Clock Format
menu.
The current clock display format is marked with an asterisk.
5. Press the Tuning Up or Down buttons to select either 12 or 24 hour
format. Press the Select
The display will then revert to the previous menu.
If the 12 hour clock format is chosen, the radio will then use the 12 hour
clock for the setting of alarms, and will display a 12 hour clock with an AM
or PM indicator when in standby mode.
1
2-5
2-5
i /
Select
2-5
Clock and Alarms
Main menu
FM
Bluetooth
AUX in
Sleep
Alarms
System settings
System settings
Equaliser
Network
Time/Date
Brightness
Language
Factory Reset
Time/Date
Set Time/Date
Auto update
Set format
Set timezone
Daylight savings
Date/Time
12/24 hour format
78