Prune Servers; Wake On Lan - Roberts R100 Manual

Prune servers

connection in its internal memory. If you use the radio at different locations
interested in. The prune servers functions allows the list to be updated so that
only active UPnP severs on the currently connected network are shown when
selecting 'Shared Media' from the Music Player menu.
1. Press the Menu button to enter the main Music Player menu.
2. Press the Tuning Up or Down buttons until 'Prune servers' is highlighted
on the display. Press the Select button.
3. To remove servers that are no longer required press the Tuning Up or
Down buttons until 'YES' is highlighted on the display. Press the Select
button to cause the servers to be removed.
4. If you do not wish to prune servers press the Tuning Up or Down buttons
to highlight 'NO' and press the Select
your radio, you may not wish to keep that computer operating when you are
shut down, or enter a Standby or hibernation state when it is not being used.
command via the network provided that the radio has previously connected to
a UPnP server application on that computer. A computer which is not currently
active will be shown with a question mark in the list of UPnP servers.
Many computers will not respond to Wake On LAN commands from the radio in
all modes, and may require software, device driver, BIOS, hardware or router
respond to Wake On LAN is not considered a fault of the radio.
65
1
2-4
2-4
i /
Select
2-4
Music player
USB playback
My playlist
Repeat play: Off
Shuffle play: Off
Clear My playlist
Prune servers
Prune servers
Prune shared media
wake on LAN servers?
Shared media
?DAD: Les:
?JENNY: Jenny's music
HOME_PC: Mum's music