Roberts R100 Manual page 57

4. Press the Tuning Up or Down buttons until 'Shared media' is highlighted
and press the Select button to select. The radio will scan for all available
UPnP servers. It may take a few seconds for the radio to complete its
scan. The radio will display '<Empty>' if no UPnP servers are found.
5. After scanning, select your UPnP server using the Tuning Up or Down
and Select buttons. If you allowed automatic connection previously,
your radio should now connect and you may skip to the next page.
If you did not permit automatic connections, your radio will then normally
display 'Unauthorised' at this stage.
UPnP server. Whether prompted or not, in order that the radio may
and select the 'Stream...' item to open the 'Media Streaming' window.
Select 'Automatically allow devices to play my media' then select
'Automatically allow all computer and media devices'.
Alternatively select 'More Streaming options' to enable sharing on a
'per device' basis.
7. In the 'More streaming options' window, the radio may be listed as a
blocked device. Click on the button shown to select 'Allowed'.
unit and WMP 12 to communicate (see the 'Troubleshooting' section
on page 111).
8. On the radio, select the named server again using the Tuning Up or
Down and Select buttons. If WMP 12 is now able to communicate with
your radio you will be presented with some media selection options
on the display.
'Library' tab in WMP 12
4-8
4-8
i /
Select
4-8
Allowing a device to connect to Windows Media Player 12
Music Player
Music player
Shared media
USB playback
My playlist
Repeat play: Off
Shuffle play: Off
Clear My playlist
Shared media
JENNY: Jenny's music
HOME_PC: Mum's music
7
54