Setting The Clock Format - Roberts Blutube 50 User Manual

Setting the clock format

The clock display used in standby mode and when the clock radio is in
use can be set to 12 or 24 hour format. The clock format can only be
set while the unit is playing. The selected format is then also used when
setting the alarms.
1. Press and release the On/Off button to switch on the radio.
2. To set the clock format, press and release the Menu button. The menu
will show on the display.
3. Rotate the Tuning control until 'SYSTEM' appears on the display.
Press and release the Tuning control.
4. Rotate the Tuning control until 'TIME' appears on the display. Press
and release the Tuning control.
5. Rotate the Tuning control until '12/24 HR' appears on the display.
Press and release the Tuning control.
6. Rotate the Tuning control to display either 12 or 24 hour format.
7. Press and release the Tuning control to confi rm the setting.
If the 12 hour clock format is chosen, the radio will then use the 12 hour
clock for the setting of alarms, and will display a 12 hour clock with an AM
or PM indicator on the display.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
2
3-7
30