Scan Setting - Roberts R100 Manual

When using the FM mode your radio can be set to either scan local stations
or to scan all stations including distant radio stations.
1. Press and hold the Mode button and then select the FM radio mode
(see page 6).
2. Press the Menu button to enter the FM menu.
3. Press the Tuning Up or Down buttons until 'Scan setting' is highlighted
and then press the Select
The current scan setting is indicated with an asterisk.
4. To set your radio so that only the stations with the strongest signals
are found during scanning press the Tuning Up or Down buttons until
'YES' is highlighted. Press the Select
(Normally this will restrict scanning to local transmissions.)
Alternatively, to set your radio so that all available stations are found
during scanning (local and distant transmissions) press the Tuning
Up or Down buttons until 'NO' is highlighted. Press the Select button
5. Press the Menu button to return to the normal FM mode display.
1,2
3,4
3,4
i /
Select
3,4
FM Radio
Internet
My Music DAB Radio
Radio
FM Radio Bluetooth AUX
FM radio
FM

Scan setting

Audio setting
System settings
Main menu
FM station scan
Strong stations only?
YES NO
FM station scan
Strong stations only?
48