Dab Mode - Roberts R100 Manual

DAB Radio
1. Carefully extend the telescopic aerial fully.
2. Press the On/Standby button to switch on the radio. If the radio has
been used before the last used mode will be selected.
3. Press and hold the Mode button and then select the DAB radio mode
(see page 6).
DAB channels will be carried out. The display will show 'Scanning'. (If
the radio has been used before the last used station will be selected
instead.)
During the scanning process, as new stations are detected the station
counter will increase and the stations will be added to the list which is
stored in the radio. The bar graph indicates the progress of the scan.
5. When scanning is completed the radio will list the stations found (in
numeric-alpha order 0....9...A...Z), unless it has previously been tuned
to a DAB station.
Press the Tuning Up or Down buttons to scroll through the list of
available DAB radio stations.
Press the Select button to select the highlighted station. The display
may show 'Connecting...' while the radio re-tunes.
Use the Volume buttons to set the sound level as needed.
6. If the station list is still empty after the scan the display will show
'Service not available'. If no stations are found it may be necessary
to relocate your radio to a position giving better reception.
2
3
5
5
i /
Select
5
DAB Radio
Internet
My Music DAB Radio
Radio
FM Radio Bluetooth AUX
DAB radio
Scan
Stations: 24
Scanning
Station list
Heart
Heat
Kerrang
Kiss
LBC
Planet Rock
12:34
DAB
LBC
Londons Biggest
Conversation - LBC
DAB Radio
36