Prune Stations - Roberts R100 Manual

Prune stations

If you move to a different part of the country, some of the stations which
were listed may no longer be available. Also, from time to time, some DAB
services may stop broadcasting, or may change location or frequency.
Stations which cannot be found, or which have not been received for a
very long time are shown in the station list with a question mark.
The Prune stations function will delete the marked DAB stations from
your station list.
1. Press the On/Standby button to switch on your radio.
2. Press and hold the Mode button and then select the DAB radio mode
(see page 6).
3. Press the Menu button to enter the DAB menu.
4. Press the Tuning Up or Down buttons until 'Prune invalid' is highlighted.
Press the Select button.
5. To cause the stations list to be pruned, eliminating unavailable stations
press the Tuning Up or Down buttons until 'YES' is highlighted on
the display.
6. Press the Select button to cause the invalid station names to be
removed from the station list.
If you do not wish to prune stations, highlight 'NO' and then press the
control. The display will revert to the previous menu.
Note: If you have moved your radio to a different part of the country you
should also carry out a search for new stations (please see the section
'Finding new stations' on page 40).
2,3
4,5
4,5
i /
Select
4,6
DAB Radio
Internet
My Music DAB Radio
Radio
FM Radio Bluetooth AUX
DAB radio
DAB
Station list
Scan
Manual tune
Prune invalid
DRC
Station order
Prune invalid
This removes all invalid
stations continue?
44