Dissolve A Group - Roberts R100 Manual

1. Access the menu for the current mode, press the Menu button.
2. Press the Tuning Up or Down buttons until 'System settings' is highlighted
on the display.
3. Press and release the Select button to enter the settings menu.
4. Press the Tuning Up or Down buttons until 'Multi-room' is highlighted
on the display. Press and release the Select button.
5. Press the Tuning Up or Down buttons until 'Dissolve group' is highlighted
on the display. Press and release the Select button.
6. The current group will be dissolved.
Each of the products that were in the group can now be operated
individually.
Alarms and Multi-room
remove itself from that group when the radio switches itself on as a result of an
alarm having been set. This is so that an alarm sounding on one radio will not
cause all of the other products in the group to be activated at the same time.
If you wish to use your radio as part of a multi-room group after using the
alarm function, you will need to add the radio back into the group manually.
This is most easily performed using the UNDOK app as described on page 87.
95
1
2-5
2-5
i /
Select
2-5
Main menu
FM
Bluetooth
AUX in
Sleep
Alarms
System settings
System settings
Language
Factory reset
Software update
Setup wizard
Info
Multi-room
Multi-room
View details
Create new group
Add to group
List current clients
Leave group
Dissolve group
Dissolved