Roberts R100 Manual page 113

to visit the help section on our web site.
of these steps may help to resolve the problem:
browse the web) using the same network.
2. Check that a DHCP server is available (normally a router function).
settings' -> 'Network' -> 'Manual settings'
wireless you then need to choose 'DHCP enable' or 'DHCP disable'.
If you enable DHCP then the radio will negotiate with your router (or
DHCP server) and will be provided with an IP address as well as the
manually, refer to paragraph 6.
As a minimum, the radio needs access to UDP and TCP ports 80
and 123. Port 53 may be required for DNS. Some Internet radio
services may require additional ports to be open. Windows Media
Player 11 or 12 will allocate a port number for UPnP media sharing
particular IP addresses to have trusted access.
4. Check that your access point does not restrict connections to particular
Menu' -> 'System settings' -> 'Network' -> 'View settings' -> 'MAC
address'.
The MAC address will typically be of the form
5. If you have an encrypted network, check that you have entered the
correct encryption key into the radio. Remember that text-format WPA
keys are case sensitive. If your radio displays 'Network error' when
attempting to connect to an encrypted network, then please ensure
that you enter the correct key for the network. If the problem persists,
'Main Menu' -> 'System
6. If you need to set up your radio's IP address manually, you will need
menu items 'Main Menu' -> 'System settings' -> 'Network' -> 'Manual
settings' -> 'Wired' or 'Wireless' (as needed) -> 'DHCP disable'.
The radio will then prompt you in turn for the
If you are setting up a wireless connection manually you will also need
to enter the SSID, the encryption type, and the encryption key.
See page 107 for full details on how to set up your radio's network
00:22:61:xx:xx:xx
Ethernet IP address
Ethernet Subnet mask
Ethernet Gateway address
Ethernet Primary DNS
Ethernet Secondary DNS
Information
'Main
110