Setting The Clock Format - Roberts User Manual

Setting the clock format

The clock display used in standby mode and on the playing mode screens
can be set to 12 or 24 hour format. The selected format is then also used
when setting the alarms.
1. Press the On / Standby button to switch on the radio.
2. To set the clock format, press the Menu button to enter the setup
menu.
3. Press the Tuning Up or Down buttons until 'Clock' appears on the
display. Press and release the Select button.
4. Press the Tuning Up or Down buttons until 'Set 12/24 hour' appears
on the display. Press and release the Select button.
5. Press the Tuning Up or Down buttons to display either 'Set 12 hour'
or 'Set 24 hour' format.
6. Press the Select button to confi rm setting. The display will return to
the previous display.
If the 12 hour clock format is chosen, the radio will then use the 12 hour
clock for the setting of alarms, and will display a 12 hour clock with an AM
or PM indicator on the display.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
2
3-5
3-5
3-6
36