Roberts R100 Manual page 82

After a connection to the Internet has been established, your radio will normally
setup (see page 9). Should you need to set the time manually, change the
time zone, or manually switch from winter to summer time (from GMT to BST
in the UK, also commonly known outside the UK as daylight savings time),
then please follow this procedure.
1. Press the On/Standby button to switch on your radio.
2. Press the Menu button to access the menu for the current mode.
3. Press the Tuning Up or Down buttons until 'System settings' is highlighted
on the display. Press the Select button to enter the System Settings menu.
4. To change the time zone setting go to step 11.
To change from winter to summer time go to step 13.
To change the current time or date setting press the Tuning Up or Down
buttons until 'Time/Date' is highlighted on the display, then press the Select
button to enter the time and date setting screen.
5. Press the Tuning Up or Down buttons until 'Set Time/Date' is highlighted
on the display. Press the Select button to enter the clock setup. The day
6. Press the Tuning Up or Down buttons until the correct day is shown on
the display. Press the Select button to enter the selection. The month
7. Press the Tuning Up or Down buttons to select the correct month. Press
the Select
79
1
2
3-7
3-7
i /
Select
3-7
Main menu
FM
Bluetooth
AUX in
Sleep
Alarms
System settings
System settings
Equaliser
Network
Time/Date
Brightness
Language
Factory Reset
Time/Date
Set Time/Date
Auto update
Set format
Set timezone
Daylight savings
Set Time/Date
06 - 04 - 2015
13 : 53
Set Time/Date
06 - 04 - 2015
13 : 53