Roberts R100 Manual page 108

Each time that you connect your radio to a WiFi network, the radio will store
the details of that connection (SSID, security key, DHCP/IP address settings)
used in multiple locations there is no need to enter the network settings when
returning to a location previously visited.
if it is unable to do so will you need to use the Network Wizard (see page 14).
1. Access the menu for the current mode by pressing the Menu button. Press
the Tuning Up or Down buttons until 'System settings' is highlighted on
the display. Press the Select button to enter the System Settings menu.
2. Press the Tuning Up or Down buttons until 'Network' is highlighted on the
display. Press the Select button to enter the Network Settings menu.
3. Press the Tuning Up or Down buttons until
on the display. Press the Select
which is currently in use (if any) is marked with an asterisk.
5. The radio will offer a 'YES' or 'NO' selection. Press the Tuning Up or Down
buttons to select 'YES' and then press the Select button. The selected
105
is highlighted
Tuning Up or Down buttons
Select button.
1
1-5
1-5
i /
Select
1-5
Main menu
FM
Bluetooth
AUX in
Sleep
Alarms
System settings
System settings
Equaliser
Network
Time/Date
Brightness
Language
Factory reset
Network settings
Wlan region
Manual settings
NetRemote PIN Setup
Network profile
Clear network settings
Keep network connected
Network profile
Jones family
Paul's network
*
Test router
Confirm delete
Confirm delete