Setting The Clock Format - Roberts Stream 207 Instruction Manual

Setting the clock format

The clock display used in Standby mode and on the playing mode screens
can be set to 12 or 24 hour format. The selected format is then also used
when setting the alarms.
1. With your radio switched on, press the Menu button to access the
menu for the current mode.
2. Rotate the Tuning/Select control until 'System settings' is highlighted
on the display. Press the control to enter the System Settings menu.
3. Rotate the Tuning/Select control until 'Time/Date' is highlighted on
the display. Press the control to enter the time setup.
4. Rotate the Tuning/Select control until 'Set format' is highlighted on
the display. Press the control to enter the Clock Format menu.
The current clock display format is marked with an asterisk.
5. Rotate the Tuning/Select control to select either 12 or 24 hour format.
Press the control to confi rm your choice of clock format. The display
will then revert to the previous menu.
If the 12 hour clock format is chosen, the radio will then use the 12 hour
clock for the setting of alarms, and will display a 12 hour clock with an AM
or PM indicator when in standby mode.
Clock and Alarms
Main menu
DAB
FM
AUX in
1
Sleep
Alarms
System settings
System settings
Equaliser
Network
Time/Date
2-5
Backlight
Inactive Standby
Language
Time/Date
Set Time/Date
Auto update
Set format
Set timezone
Daylight savings
Date/Time
12/24 hour format
74