Rtfm Switch - CyberData VoIP Intercom 010935F Operation Manual

Hide thumbs Also See for VoIP Intercom 010935F:

Table of Contents

4.1.6 RTFM Switch

When the Intercom is operational and linked to the network, use the Reset Test Function

Management (RTFM) switch (see SW1 in

confirm the Intercom's IP Address and test that the audio is working.

Note

Operations Guide

You must do these tests prior to final assembly.

930242M

Figure

4-8) on the Intercom board to announce and

Figure 4-8. RTFM Switch (SW1)

Installing the VoIP Intercom

Intercom Setup

CyberData Corporation

Table of Contents

Do you have a question about the VoIP Intercom 010935F and is the answer not in the manual?