Alarm Table - Toshiba RemotEye III User Manual

Alarm Table

This page provides past and active UPS alarm activity and descriptions. This page will refresh automatically at a
user-defined rate (See Figure 33: RemotEye III Alarm Table Example). To change or view the refresh rate setting,
select "RemotEye III Management" → "HTTP Page Refresh Rates" in the RemotEye III web interface.
Number of Present Alarms
This field shows the number of active UPS alarms.
Lastest Alarm
This field shows the last recorded UPS alarm in the format Date, Time, and Information about the alarm.
Alarm ID
This field shows the sequential number associated with the alarm; it indicates the activation sequence of the alarms.
This number will be reset after a RemotEye III reboot.
Alarm Time
This field shows the RemotEye III alarm time stamp. This value is displayed in the hh:mm mm/dd/yyyy format.
Note: The time depends on the RemotEye III clock setting.
Alarm Description
Info: UPS has encountered a change of state condition such as switching from on-line to bypass state.
Warning: UPS has encountered a noncritical abnormal condition that requires attention.
Fault: UPS has encountered a critical abnormal condition and requires attention. Please refer to the UPS manual for
possible causes and solutions. If more information is needed or additional assistance is required, contact Toshiba
authorized service center for Service.
1600XP Alarm/Trap Table
RemotEye III User Manual – 62330-005
Figure 33: RemotEye III Alarm Table Example
53