Toshiba Remoteye Application Programs; Toshiba Remoteye Client Software - Toshiba RemotEye III User Manual

Toshiba RemotEye Application Programs

Toshiba RemotEye Client Software

The Toshiba RemotEye Client Software runs on servers/PCs and connects to a designated RemotEye III. When the
servers/PCs start up the RemotEye III scans for the UPS status. When UPS power events are detected, the RemotEye
III broadcasts a Shutdown command to the workstation. The Toshiba RemotEye Client Software will broadcast
warning messages (on the screen of the servers/PCs) and then shut down the server/PCs gracefully. See page 69, for
more details on the Shutdown Events configurations.
Install RemotEye III Client Shutdown software on VMware ESXi 5
See Appendix A for details of installing the Clinet Shutdown Software on VMware ESXi servers
.
Installation of RemotEye III Client using Windows 9x/2000/NT/XP/Vista/7/8 or
Windows Server 2003/2008/2012
Insert the RemotEye CD-ROM into the CD-ROM drive.
Run the Installer program (on the CD-ROM).
A configuration window box will be displayed on the screen, type in the IP address of the designated RemotEye, its
Client Name, and its Shutdown Delay Time. Click the Def. button to enter the workstation's name as the Client Name
setting (see Figure 53: Toshiba RemotEye Client Software).
Upon completion of the setup screen's entries, click OK and the RemotEye service will connect to the RemotEye
automatically.
RemotEye III User Manual – 62330-005
Figure 53: Toshiba RemotEye Client Software
103