Toshiba RemotEye III User Manual page 52

Battery Parameters
This page provides the battery status and battery run-time information. This page will refresh automatically at a user-
defined rate. To change or view the refresh rate setting, select "RemotEye III Management" → "HTTP Page Refresh
Rates" in the RemotEye III web interface.
Parameter #
1 UPS Battery Status
2 Elapsed Time on Battery Power (Secs)
3 Battery Voltage (Vdc)
4 Calculated Battery Shutdown Voltage (Vdc)
5 Battery Discharge Current (Adc)
6 Battery Charge Status
7 Number of Discharge
8 Battery Life Reaming (Month)
9 Battery Rated Ampere Hour (Ahr)
Battery in Series
10
11 Battery in Parallel
Battery Installation Date
12
RemotEye III User Manual – 62330-005
Battery Parameters
Object Description
This field shows the status
of the UPS batteries. These
readings include:
Unknown, Normal, Low,
Depleted, Discharging, and
Failure.
This field shows the
elapsed time (in seconds)
since the UPS switched to
battery power.
This field shows the
battery voltage in VDC.
This field shows the
battery's shutdown
voltage in VDC.
This field shows the
battery's discharge current
in Amps.
This field shows the
present Battery Charge
status.
This field shows the
present number of battery
discharges.
This field shows the
remaining battery life. The
maximum battery lifetime
is 5 years. This shows the
remaining battery lifetime
in months.
This field shows the
present battery capacity in
Ampere Hour.
This field shows the
number of batteries
connected in series.
This field shows the
number of batteries
connected in parallel.
This field shows the last
installation date of the UPS
system's batteries. This
value is displayed in the
dd/mm/yyyy format.
When the UPS batteries
are replaced, this value
should be adjusted
accordingly by the service
1600XP 4200FA 4300
  
  
  
  
  
  
  
  
  
  
  
  
51