Table of Contents
Advertisement
EMD Group
Main Menu → (1) Toshiba RemotEye III Configuration → (5) EMD Group (See Figure 24: Console EMD Group
Menu Description)
The EMD Group menu provides access to the system settings listed below. The settings may be viewed and changed
from this screen.
1.
Temperature Group — The Temperature Group provides the options to setup the low and high warning
and critical points. Users also have the options to setup the hysteresis and calibration offset from this
group.
2.
Humidity Group — The Humidity Group provides the options to setup the low and high warning and
critical points. Users also have the options to setup the hysteresis and calibration offset from this group.
3.
Alarm-1 Group — The Alarm-1 Group provides the option to setup this dry contact as normal close,
normal open, high active, low active and disabled.
4.
Alarm-2 Group — The Alarm-2 Group provides the option to setup this dry contact as normal close,
normal open, high active, low active and disabled.
5.
Device Status — The Device Status allows the administrator to allow RemotEye III to auto-detect EMD
or to disable. "Auto" will enable the RemotEye III to auto detect the EMD that is connected to its COM
port.
Note: These features apply to EMD module only. EMD sold separately.
+================================================================+
|
+================================================================+
1. Temprature Group
2. Humidity Group
3. Alarm-1 Group
4. Alarm-2 Group
5. Device Status : Auto
0. Return to previous menu
Please Enter Your Choice =>
RemotEye III User Manual – 62330-005
[ EMD Group Menu ]
Figure 24: Console EMD Group Menu Description
|
31
Advertisement
Table of Contents
