Toshiba RemotEye III User Manual page 69

UPS Battery Test (Applicable to 1600XP Only)
This page shows history, results, and configuration for UPS battery test.
•
Last Test Start Time – Displays the date and the time when the last battery test was initiated.
•
Last Test Elapsed Time – Displays the duration of the battery test.
•
Last Test Result – Displays whether the battery test passed or failed.
•
Battery Test Command:
None - No action.
o
Quick Test (10 sec) - Quick test for 10 seconds.
o
Cancel Test - Cancel the current battery test.
o
Clear Test Result - Clear the last battery test result recorded by RemotEye III.
o
UPS Startup Batt Test Enable
This field allows the RemotEye to force a battery test when UPS starts following a shutdown. It is enabled by the
administrator.
UPS Battery Test Enable
This field allows the RemotEye to enable or disable a battery test. It is set by the administrator.
UPS Battery Test Condition Status
This field specifies the availability of the battery test feature. Note: the battery test can only be done once a day.
UPS Battery Test Schedule (Applicable only to 1600XP)
This page allows configuring the battery test schedule for the UPS.
Index
This field shows the battery test number.
Test Day
This field allows the administrator to set the day of the week that the battery test is to be performed or to view the
current setting.
Test Time
This field allows the administrator to set the time that the battery test is to be performed or to view the current setting.
This value is displayed in hh:mm format.
Actions
This field shows the battery test type option.
•
None – No action
•
Quick Test (10 Sec) – Quick test for 10 seconds
68 RemotEye III User Manual – 62330-005