Remoteye Iii Management - Toshiba RemotEye III User Manual

RemotEye III Management

This menu allows the administrator to view the RemotEye III settings/control parameters. The security levels are as
followed: Users have read-only privileges, whereas the administrators have read/write access.
Date and Time
This page shows the Date & Time options setting/parameters for RemotEye III.
Date On RemotEye III (mm/dd/yyyy)
This field show the current date stored in the RemotEye III. Please see the following sections that explain how to
change RemotEye III's date. The date value is displayed in the MM/DD/YYYY format (i.e., Aug 18, 2012 is
08/18/2012).
Time On RemotEye III (hh:mm:ss)
This field shows the current time stored in the RemotEye III. Please see the following sections that explain how to
change RemotEye III's time. The time value is displayed in the hh:mm:ss 24-hour format (i.e., 8:30 p.m. is 20:30:00).
Synchronize with computer time (Computer Date & Computer Time)
If this option is selected, the administrator is allowing the RemotEye III's date and time to be synchronized with the
end user's computer date and time.
Synchronize with NTP Server (IP Address)
If this option is selected, an NTP (Network Time Protocol) server IP address must be entered and select the correct
time zone to activate this option. After configuration, the RemotEye III will synchronize its time and date with the
server periodically.
Set Manually (Date (mm/dd/yyyy) & Time (hh:mm:ss))
If this option is selected, will allow the administrator to configure the RemotEye III's date and time manually,
Time Zone
This field allows the administrator to set the local time zone and compensate for Daylight Savings Time when setting
the RemotEye III date and time manually or via an NTP server.
RemotEye III User Manual – 62330-005 77