Table of Contents
Advertisement
UPS Alarm E-Mail/SNMP Trap Configuration
This section allows the administrator to select which faults, warnings, and informational notifications to receive via
E-mail or SNMP Traps. If a checkbox is not filled, RemotEye III will not send that particular alarm. By default, all of
the alarms are turned ON (See Figure 35: RemotEye III Selectable E-mail/SNMP Traps Notifications).
Figure 35: RemotEye III Selectable E-mail/SNMP Traps Notifications
UPS Configuration Display (Applicable to 1600XP Only)
This section shows the display parameters of the UPS.
Display Sleep Timer (Mins)
This field shows the amount of time the display will remain active before it will go to "sleep".
Display Buzzer Mode
This field shows the Buzzer status as Enabled or Disabled.
RemotEye III User Manual – 62330-005
63
Advertisement
Table of Contents
