Toshiba RemotEye III User Manual page 50

Bypass Parameters
This page shows the UPS bypass values. This page will refresh automatically at a user-defined rate. To change or
view the current refresh setting, select "RemotEye III Management" → "HTTP Page Refresh Rates" in the RemotEye
III web interface.
Parameter #
Object
1 Bypass Power Supply Configuration
2 Bypass Number of Lines
3 Bypass Voltage (V)
Bypass Current (Amps)
4
5 Bypass Frequency (Hz)
Bypass Apparent Power (VA)
6
Bypass Under Voltage Detection (%)
7
8 Bypass Under Voltage Recovery (%)
9 Bypass Over Voltage Detection (V)
10 Bypass Over Voltage Recovery (V)
11 Bypass Line to Neutral Voltage (V)
12 Bypass Voltage Percent (%)
13 Bypass Under Voltage Detection Level (%)
14 Bypass Over Voltage Detection Level (%)
RemotEye III User Manual – 62330-005
Bypass Parameters
Description 1600XP
This field shows the
present power supply
information during bypass
for the UPS.
This field shows the
number of bypass lines for
the UPS.
This field shows the UPS
voltage during bypass in
VAC.
This field shows the
present UPS bypass current
in Amps.
This field shows the
present UPS bypass
frequency in Hertz.
This field shows the
present UPS bypass
apparent power in VA.
This field shows the
minimum allowable
voltage before it falls into
bypass under voltage
range.
This field shows the
allowable voltage that it
can recover from under
voltage.
This field shows the
maximum allowable
voltage before it falls into
over voltage range.
This field shows the
allowable voltage that it
can recover from over
voltage.
This field shows the
present UPS bypass line to
neutral voltage.
This field shows the UPS
bypass voltage in percent.
This field shows the UPS
bypass under voltage
detection in percent.
This field shows the UPS
bypass over voltage
detection level in percent.
4200FA
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4300














49