Toshiba RemotEye III User Manual page 119

Used in conjunction with the RemoteConfig Tool, the Tupgrade Tool can push/save a RemotEye Config file to one
or more selected RemotEyes simultaneously, making for a quick system setup.
To save RemotEye III Config file:
1) Discover or Manually add the RemotEye III to the list.
2) Select the check box of the RemotEye III to acquire config file.
3) Press the Edit button and enter administrator login credentials.
4) Press the Acquire button and select the config file destination.
Load Config file to RemotEye III:
1) Discover or Manually add the RemotEye III to the list.
2) Select the check box of the RemotEye III to load the config file.
3) Press the Edit button and enter administrator login credentials.
4) Press the Open file button and select the config file to be uploaded.
5) Press the Upgrade Firmware button to upload the selected config file.
Upgrading RemotEye III Firmware from UNIX
The RemotEye III firmware may be upgraded from a Unix platform by performing the procedure below. To upgrade
the firmware using a UNIX operating system, the tftp command must be installed on the system.
To upload the new firmware to the RemotEye III, execute the following command line:
# tftp
tftp> binary
tftp> connect <host>
tftp> put <filename> upgrade@<password>@<username>
where:
binary : Binary data download mode.
<host> : RemotEye III IP address.
Example: 172.168.1.18.
put : PUT command.
<filename> : Name of the file containing the firmware image.
Example: \TSB100.bin.
upgrade : Upgrade key word.
@ : Character separator.
<password> : Community Read/Write string.
<username> : HTTP login user name.
118 RemotEye III User Manual – 62330-005