Table of Contents
Advertisement
9.5.
Type "w" and press Enter. (writes to file)
9.6.
Type "q" and press Enter. (exits file)
10. Connect to vMA using WinSCP software to transfer the RemotEye Client shutdown software.
Open WinSCP and select either SFTP or SCP for the file protocol, and enter the vMA IP address/Host
Name, User name, and Password. (Example: Host Name - 10.2.0.11.) Then click the Login button.
(See Figure 0-5)
10.1. Locate SD_ESXi_TSB_V100.tar file (left side), then select the directory where you want it stored on the
vMA (right side) and press the F5 key. (See Figure 0-6)
RemotEye III User Manual – 62330-005
Figure 0-5 WinSCP Login Screen
127
Advertisement
Table of Contents
